LEED-AP-BD+C Dumps With Exact Questions and Answers

Sustainable Sites (SS) Credit: Light Pollution Reduction addresses light trespass, glare, and skyglow, ensuring that a project:

Minimizes unnecessary outdoor lighting to prevent disruption to surrounding properties.

Uses full-cutoff fixtures to direct light downward and reduce nighttime skyglow.

Follows lighting zone guidelines based on project location.

This promotes dark-sky compliance and reduces light pollution, benefiting ecosystems and human health.

(Source: Official LEED BD+C Reference Manual)

The best practice for using alternative water sources is to target the uses that require the least treatment first, such as irrigation, toilet flushing, and cooling tower makeup. This reduces the energy and cost associated with treating water to higher standards than necessary. Matching uses by location is not a requirement, nor is treating all alternative water sources to potable water standards. A project may use more than one alternative water source as long as they meet the applicable codes and standards. References: WE Credit Indoor Water Use Reduction, WE Credit Outdoor Water Use Reduction, WE Credit Cooling Tower Water Use1

Green Infrastructure (GI) and Low-Impact Development (LID) rainwater management strategies improve upon the conventional approach for rainwater management by replicating a site’s natural hydrology. GI and LID are design approaches that use various practices to mimic the natural water cycle and reduce the negative impacts of development on the environment. They aim to preserve, restore, or create natural features that can capture, infiltrate, evaporate, or reuse rainwater on site, rather than conveying it to a centralized stormwater system. By doing so, they can reduce runoff volume and peak flow, improve water quality, enhance groundwater recharge, increase biodiversity, and create more attractive and resilient landscapes. Therefore, option A is the correct answer. The other options are not true for GI and LID strategies. Discharging rainwater at a faster rate (option B) would increase the risk of flooding, erosion, and pollution downstream. Increasing a site’s impervious surface (option C) would reduce the infiltration and evaporation of rainwater and increase runoff and heat island effects. Providing a greater volume of rainwater detention (option D) would not necessarily improve the site’s hydrology, as detention is only a temporary storage of rainwater that does not address the runoff quality or quantity issues. For more information on GI and LID rainwater management strategies, you can refer to the LEED v4 Reference Guide for Building Design and Construction1 or the Green CE course on Rainwater Management for LEED v4.1 Projects2.