IP addresses of maintenance ports

IP addresses of management ports

IP addresses of all the ports

IP addresses of all the ports and of the SVP

Storage Navigator

Maintenance Utility

Initial Setup Wizard

HSA Embedded

Check if the status of the PS is blocked, and if yes, then replace it directly.

Use the Maintenance Utility for blocking the PS, then replace it.

Use the Maintenance Utility for blocking the controller, then replace the PS.

Use the MPC for blocking the PS, then replace it.

Two additional Disk Boards (DKBs) have to be installed.

Slots B of both controllers must be available for DKB installation.

The SAS Expansion license has to be installed.

In Shared Memory, the Extension1 has to be enabled.

Drive Boxes (DBs) with SAS interface have to be added.

from DKA to DKB

from ENC to ENC

from DKB to ENC

from DKA to SSW

It provides the LAN connection to the file module.

It provides the maintenance port connecting to the MPC.

It provides the iSCSI connection to the servers.

It provides the management port connecting to the customer LAN.

HSA Embedded

MPC Software

Storage Navigator

Maintenance Utility

Hitachi Remote Ops Monitor Agent

Hitachi Remote Ops SVP Agent

Hitachi Ops Center Protector

Storage Navigator

You must use the Replace button in the Maintenance Utility before removing the drive.

You must wear a wrist strap for ESD protection.

The red LED on the drive must be lit.

The Drive Box where the drive is located must be powered down.

Administrator Guide

Product Documentation Library

Maintenance Manual

Service Guide