Use out of the box report templates

Export any dashboard to PDF

With a right-click operation

All of the above

Ten

Four

Unlimited

Twenty

Low and High

Emergency, Critical, Alert, Error, Warning, Notice, Informational, and Debug

Critical, Warning, and Informational

System Down, System Impaired, Attack, SLA/SLO Violation, and Security Policy Violation

Low, Med, and High

Netflow

SteelFlow-NET

Passive monitoring via SPAN/TAP

SNMP

Steelflow

1000Mbps

any speed, it does not matter.

10000Mbps

10Mbps

100Mbps

Adding an alerting threshold for the policy in question

Adding the host or subnet to the special pre-defined custom hostgroup called “trusted-hosts” that suppresses alerting from all security policies.

Changing the Advanced Setting for the policy

Changing the Global Policy Settings

Suppressing events against a specific host or subnet is not possible

25,000 flows per minute

50,000 flows per minute

As many flows as can be collected from up to 5 other devices

100,000 flows per minute

Limited by the Cascade Profiler license limit

Service Health

Watched Traffic

WAN Utilization

Service Map

Security Threats

There is no reason to create this definition.

This definition can be used to look for all hosts on the network that are not in other groups.

This definition can be used to identify hosts that have incorrect IP address assignments.

This definition can be used to look for all hosts on the internal network that are not in other groups within the same group type.

This definition can be used to look for all hosts on the internal network that are not in other groups in any group type.

The values for each application are defined under Definitions- > Applications.

The values of each part of the network are defined under Definitions- > Host Groups.

They are received in network Flow records from switches/routers as well as the Cascade Sensor or Shark.

They are received using Deep Packet Inspection within the Layer7 application headers of the packets.