CWDP-305 CWNP Certified Wireless Design Professional exact Exam Questions

Certified Wireless Design Professional

Last Update 4 hours ago Total Questions : 319

The Certified Wireless Design Professional content is now fully updated, with all current exam questions added 4 hours ago. Deciding to include CWDP-305 practice exam questions in your study plan goes far beyond basic test preparation.

You'll find that our CWDP-305 exam questions frequently feature detailed scenarios and practical problem-solving exercises that directly mirror industry challenges. Engaging with these CWDP-305 sample sets allows you to effectively manage your time and pace yourself, giving you the ability to finish any Certified Wireless Design Professional practice test comfortably within the allotted time.

Question # 81

You're preparing to perform a site survey for a company that processes meat. Some areas are restricted due to high-security. What do you have to do in order to proceed with the site survey?

Gain appropriate access and clearance to perform the site survey.

Gain meat processing access certification from the FDA.

Ensure that you and your team are using food industry approved USB adapters for the survey.

Just begin the survey, they will understand.

Question # 82

A designer has created a WLAN design that has been implemented in an organization. The network exists in a four-story building. Because each floor has an identical floor plan, the designer designed only one floor and had the installers duplicate the design on each floor. Now, in validation, it is not performing well. What best explains the problem caused by this process?

The result was that APs were above and below each other on the same channel, resulting in excessive CCI. The APs should have been deployed so that they were not directly above and below each other and so that they used varying channels between floors

The result was that clients could only connect to APs on their floor and, in a multi-floor deployment, you want clients to connect to APs on other floors in case they roam between floors.

The result was that ACI was increased because the APs were deployed above and below each other on the same channels.

The result was that the frequency utilization was too low for the clients to capture RF waves on which to transmit their signals.

Question # 83

When implementing WLAN security according to common best practices, what feature should be enabled when configuring an EAP type?

The "Use WEP if RADIUS server unavailable" option

The "Validate server certificate" option

The "Trusted Root Certification Authorities" list

The "Do not prompt user to authorize new servers or trusted certification authorities" option

Question # 84

While performing a validation site survey, you realize that overlapping channels are being used on the 2.4 GHz band due to the automatic channel assignment algorithm of the WLAN infrastructure. What should you do to prevent this?

Reconfigure the network to use static channel plans because automatic channel assignment algorithms are all broken

Purchase and deploy new APs from a different vendor

Reconfigure the automatic channel assignment settings to use only channels 1, 6, and 11

Leave it as it is; sometimes using all 11 channels in 2.4 GHz gives the optimum performance result

Question # 85

You are working on a VoWLAN design with your customer's wired networking team. How many distinct priority levels do you expect for the voice applications?

1 priority level, but 2 queues (one for uplink traffic, one for downlink traffic)

1 priority level per client and AP pair, so the total number depends on the expected number of clients

1 priority level for voice RTP, 1 priority level for voice control and RTCP

1 priority level for VoWLAN client traffic, 1 priority level for wired VoIP client traffic

Question # 86

What is the purpose of a Physical Installation Guide document?

To inform the install technicians of WLAN frame exchanges and communication methods

To provide clear instructions on the locations and mounting methods, and possible configuration steps for APs

To provide sources for purchasing the equipment needed to implement the WLAN

To prove that the WLAN meets the organization's requirements

Question # 87

During a public Wi-Fi session with 10 other users, you run a ping sweep but cannot detect any devices on your subnet. What feature is likely enabled on the WLAN infrastructure to prevent local communication between clients?

Peer-to-peer blocking

OSPF external routes

Band steering

Load balancing

Question # 88

Given: The 802.11ac APs you have selected for your public access deployment support many of the PHY and MAC enhancements offered by the 802.11n and 802.11ac amendments. The AP is configured for a single-band (2.4 GHz) and only allows 20 MHz channels. The WLAN radio in the AP is a 3x3 802.11n chip that supports two spatial streams. What is the maximum MCS rate that could be supported by this AP?

54 Mbps

65 Mbps

108 Mbps

144 Mbps

Question # 89

According to IEEE 29148-2018, which of the following is a characteristic of a requirements set that is not a characteristic of an individual requirement statement?

Comprehensible

Feasible

Necessary

Verifiable

Question # 90

An associated STA detects a new BSS with the same SSID as the STA's current BSS. The new BSS uses a different IP subnet than the current BSS. If the STA is configured to use 802.1X/EAP preauthentication, what is likely to occur?

The STA will not attempt to preauthenticate because the new BSS uses a different IP subnet.

The STA will attempt to preauthenticate, but fail because the new BSS uses a different data-link broadcast domain.

The STA will attempt to preauthenticate and succeed if DHCP is supported on the new subnet.

The STA will attempt to preauthenticate and succeed if IP Mobility is enabled on the AP or WLAN controller.