Ticking Clock Black Friday Special: 75% Off! Apply coupon code below to save on all exam bundles! - Ends in 0d 00h 00m 00s - Coupon code: 75epass

Exact2Pass Menu

HCIP-WLAN V2.0

Last Update 1 hour ago Total Questions : 55

The HCIP-WLAN V2.0 content is now fully updated, with all current exam questions added 1 hour ago. Deciding to include H12-323_V2.0 practice exam questions in your study plan goes far beyond basic test preparation.

You'll find that our H12-323_V2.0 exam questions frequently feature detailed scenarios and practical problem-solving exercises that directly mirror industry challenges. Engaging with these H12-323_V2.0 sample sets allows you to effectively manage your time and pace yourself, giving you the ability to finish any HCIP-WLAN V2.0 practice test comfortably within the allotted time.

Question # 1

In Portal authentication scenarios, when no trusted security certificate is installed on the Portal server, the authentication page is not displayed automatically on an STA.

A.

TRUE

B.

FALSE

Question # 2

In the N+1 backup scenario illustrated, WAC3 has a global priority of 5, while WAC1 and WAC2 each have a global priority of 6. AP1 has an individual priority of 3 on WAC1, and AP3 has an individual priority of 3 on WAC2. When no AP is connected to WAC1, WAC2, or WAC3, which WAC will AP1, AP2, AP3, and AP4 connect to, respectively?

Original exhibit: Q51 Enlarged Exhibit

A.

AP1 connects to WAC2, AP2 connects to WAC3, AP3 connects to WAC1, and AP4 connects to WAC3.

B.

AP1 connects to WAC1, AP2 connects to WAC3, AP3 connects to WAC2, and AP4 connects to WAC3.

C.

AP1 connects to WAC2, AP2 connects to WAC1 or WAC2, AP3 connects to WAC1, and AP4 connects to WAC1 or WAC2.

D.

AP1 connects to WAC1, AP2 connects to WAC1 or WAC2, AP3 connects to WAC2, and AP4 connects to WAC1 or WAC2.

Question # 3

In an N+1 backup scenario, APs determine an active/standby WAC switchover. By default, how long after an AP stops receiving CAPWAP heartbeat detection packets from the active WAC is an active/standby switchover triggered?

A.

90s

B.

180s

C.

150s

D.

75s

Question # 4

During WLAN optimization, an engineer uses the CloudCampus APP to test and identify interference from nearby wireless signals. The following figure displays the test results. Which statements are true about radio-signal interference in the current environment?

Original exhibit: Q24 Interference Exhibit

CHOOSE THREE

A.

The radio signal strength on channel 36 is high, and it is recommended that channel 36 be avoided.

B.

The current working frequency bandwidth of all channels is 20 MHz.

C.

It is recommended that set the working channel of the AP be set to 44 to reduce interference.

D.

Radio signals are mainly distributed on channels 36, 52, and 60.

Question # 5

Which of the following standards was the first to support a transmission rate exceeding 1,000 Mbps by bonding eight channels into a 160 MHz channel?

A.

802.11ax

B.

802.11n

C.

802.11a

D.

802.11ac

Question # 6

Huawei’s radio calibration solution provides global radio calibration and partial radio calibration, which differ in their calibration scope. Which of the following situations cannot trigger partial radio calibration?

A.

A new WLAN is deployed.

B.

The radio environment deteriorates.

C.

A new AP goes online.

D.

An AP goes offline due to a fault.

Question # 7

During WLAN planning and design for hospital wards and consultation rooms, two planning solutions are proposed, as illustrated. Which of the following statements are correct for selecting a solution in this scenario?

Original exhibit: Q55 Enlarged Exhibit

CHOOSE TWO

A.

If the walls between rooms are gypsum walls, solution В is recommended, where one AP or RU is ceiling-mounted to cover two rooms.

B.

If the walls between rooms are brick walls, solution A is recommended, where one wall plate AP or RU is ceiling-mounted in each room.

C.

If the walls between rooms are gypsum walls, solution В is recommended, where one AP or RU is wall-mounted to cover two rooms.

D.

If the walls between rooms are brick walls, solution A is recommended, where one wall plate AP or RU is wall-mounted in each room.

Question # 8

During acceptance testing of a customer’s wireless network, an engineer discovers that a terminal has a poor service experience. The engineer uses CampusInsight’s user journey function to check the terminal’s service experience, as shown below. Which of the following could cause the poor service experience?

Original exhibit: Q48 Enlarged Exhibit

A.

The signal strength of the terminal is low, resulting in poor service experience.

B.

The terminal does not support 802.11r and cannot perform 802.11r roaming, resulting in poor roaming effect.

C.

The performance of the terminal is poor, resulting in a low negotiation rate.

D.

The terminal enters the power-saving mode, resulting in packet loss.

Question # 9

APs may be deployed either automatically or manually in WLAN Planner. In most scenarios, manual AP deployment is recommended. Automatic AP deployment applies only to certain scenarios with simple structures.

A.

TRUE

B.

FALSE

Question # 10

Which of the following statements are accurate about performing a WLAN site survey?

CHOOSE All that Apply

A.

If there is an atrium area, a rangefinder can be used to measure and record the floor height.

B.

You need to check whether the onsite building is consistent with the drawing.

C.

You need to check whether hole drilling is allowed and easy on site.

D.

The CloudCampus APP can be used to record onsite interference source information.

Go to page: