To assign managers to groups on the AOS-CX switch by name using HPE Aruba Networking ClearPass Policy Manager (CPPM) as a TACACS+ server, you should add the Aruba

service to the TACACS+ enforcement profile and set the Aruba-Admin-Role to the group name. This configuration ensures that the appropriate administrative roles are assigned to managers based on their group membership, allowing for role-based access control on the AOS-CX switches.

Hub-Spoke VPN Configuration:

HPE Aruba Central SD-WAN Orchestrator enables hub-spoke topology where branch gateways (BGWs) connect to VPN concentrators (VPNCs) located at data centers.

A key step in configuring this is defining which VPNCs the BGWs will prefer for connectivity.

The DC Preference List is configured in the BGW groups to prioritize the data centers to which BGWs connect.

Option Analysis:

Option A: Incorrect. VPN pools control IP allocation, not which branches connect to VPNCs.

Option B: Incorrect. IKE policies define key exchange mechanisms but are not part of the connection preference process.

Option C: Correct. Admins configure a DC preference list in BGW groups to determine connectivity priorities with VPNCs.

Option D: Incorrect. IPsec policies define encryption parameters at a global level, but this is not specific to the hub-spoke connection configuration.

An HPE Aruba Networking AP ' s Device (TPM) certificate is signed by an HPE Aruba Networking Certificate Authority (CA) and is trusted by many HPE Aruba Networking solutions. This certificate is used for secure communications and device authentication within the Aruba network ecosystem.

1.CA-Signed Certificate: The Device (TPM) certificate is signed by a trusted Aruba CA, ensuring its authenticity and integrity.

2.Trust Across Solutions: Because it is signed by an Aruba CA, it is recognized and trusted by various Aruba solutions, facilitating secure interactions and communications.

3.Security: Using a CA-signed certificate enhances the security of the network by preventing unauthorized access and ensuring that communications are secure.

With User-Based Tunneling and a reserved VLAN, the access switch does not locally place the client into the final user VLAN. Instead, the switch assigns the client to a port-access role that specifies the gateway zone and gateway role. The traffic is tunneled to the gateway, and the gateway role then applies the client’s policy and VLAN assignment. Since VLAN 42 is the client VLAN for the tunneled role, it must be configured in the contractors-gw role on the gateway. It should not be configured on intermediate links or access switch client-facing ports. Configuring it in the switch role would be appropriate for local forwarding, but this scenario uses UBT with gateway-based role enforcement.

Dynamic Authorization for Enforcement Profile Updates:

When CPPM receives updated client posture or profile data, it can initiate a Change of Authorization (CoA) to update enforcement profiles dynamically.

To support this:

Dynamic Authorization must be enabled on the switches.

CPPM must be configured as a dynamic authorization client to send CoA requests.

Option C: Correct. Dynamic authorization ensures that the switch can apply updated enforcement profiles based on new information from CPPM.

Option A: Incorrect. RADIUS accounting provides session updates but does not enable dynamic changes to enforcement profiles.

Option B: Incorrect. RADIUS track is for monitoring RADIUS server availability, not dynamic enforcement updates.

Option D: Incorrect. TACACS is not used for dynamic authorization; RADIUS handles this functionality.

HPE Aruba Central Live Monitoring:

Aruba Central provides real-time Live Monitoring of network devices, including:

Application usage statistics.

Trends and changes over time for specific devices.

This information is presented in a clear and easy-to-read format, making it ideal for examining changes in application usage over different time ranges.

Option Analysis:

Option A: Incorrect. ClearPass OnGuard monitors endpoint compliance (e.g., antivirus, OS version) but does not analyze application usage.

Option B: Correct. Aruba Central ' s Live Monitoring page is specifically designed for this type of analysis.

Option C: Incorrect. ClearPass Insight generates endpoint security reports but does not track application usage.

Option D: Incorrect. ClearPass Device Insight (CPDI) focuses on device profiling and identification, not continuous application monitoring.

When a switch port connects to a wireless AP that bridges multiple client VLANs, best practice is to:

Keep the VLAN/trunking configuration on the interface (not forced by the role), so that both VLAN 18 (AP management) and VLAN 12 (clients) are supported.

Enable trust of DSCP on the AP uplink so that QoS markings from the AP (voice, real-time traffic) are honored end-to-end, instead of being remarked or reset at the switch. Aruba wired-access and campus deployment guides repeatedly recommend trusting DSCP on AP uplinks so that WMM/802.11e markings are preserved.

Option D (“Access VLAN 18 with no support for VLAN 12”) would break the design because the AP needs to carry client VLAN 12 across its uplink. Option C (auth-mode client-mode) is about how many supplicants per port are authenticated; it is not the key “recommended” setting in this scenario, and Aruba designs typically focus QoS for AP uplinks via trust settings.

Therefore, the recommended role setting here is to trust DSCP on the AP’s authenticated role → Option B.

To fix the issue where authorization fails because the usernames do not exist in the authentication source, you can configure rules in HPE Aruba Networking ClearPass Policy Manager (CPPM) to strip the domain name from the username. When certificates are issued by a Windows CA, the username in the certificate often includes the domain (e.g., user@domain.com). ClearPass might not be able to find this format in the authentication source. By stripping the domain name, you ensure that ClearPass searches for just the username (e.g., user) in the authentication source, allowing successful authentication.

To minimize disruption time if an AOS-CX switch reboots while implementing DHCP snooping and ARP inspection, you should save the IP-to-MAC bindings to external storage. This ensures that the DHCP snooping and ARP inspection tables, which are crucial for preventing spoofing attacks, are preserved across reboots. When the switch restarts, it can reload these bindings from the external storage, thereby maintaining network security and reducing the downtime associated with rebuilding these tables.

1.Preserving Bindings: Saving IP-to-MAC bindings to external storage ensures that these critical security tables are not lost during a reboot, maintaining network integrity.

2.Security Continuity: This practice helps to quickly restore security features like DHCP snooping and ARP inspection, minimizing the window of vulnerability.

3.Operational Efficiency: By preserving these bindings, the switch can resume normal operations faster, reducing disruption to network services.

TEAP can use an anonymous outer identity to protect user privacy during the EAP exchange. That is why APs and Aruba Central might display “anonymous” instead of the authenticated username. To make the actual username visible, CPPM must return the correct identity attribute after authentication. Applying an additional RADIUS enforcement profile that specifies the TEAP Method 2 username allows the infrastructure to display the real authenticated user identity. Editing the AD source does not solve what identity is returned to the AP. DPI and firewall visibility are unrelated to RADIUS identity reporting. Disabling RADIUS proxy or adding APs as network devices might help other deployments, but it does not directly replace anonymous TEAP identity reporting.

===============