The PowerEdge XE9680 server supports a high level of network throughput, which is achieved through its PCIe risers and network PCI card capacity. Here’s the detailed information:

PCIe Slots : The PowerEdge XE9680 server supports up to  10 PCIe Gen5 slots 1 . These slots are used to install PCIe devices, including network cards, which are essential for achieving high network throughput.

Riser Cards : Riser cards are used in servers to extend the PCIe slots and make them more accessible for installing additional cards, such as network cards.

Network Card Support : Each riser can support multiple PCIe network cards, allowing for expansion and increased network throughput.

Configuration : For the greatest amount of network throughput, the server can be configured with  four risers , and each riser can accommodate  two PCIe network cards 1 . This configuration maximizes the number of network cards and, consequently, the network throughput capability of the server.

By utilizing the full capacity of PCIe slots with the appropriate risers and network cards, the PowerEdge XE9680 can meet the customer’s requirement for the highest network throughput possible.

To ensure the correct server rails are on-site for the installation of PowerEdge XE servers, it’s essential to match the server model with the appropriate rail type. Based on the Dell Enterprise Systems Rail Sizing and Rack Compatibility Matrix, the following matches are correct:

XE9680 and B25: The XE9680 server is compatible with the B25 rail type, which is designed to support the size and weight of this particular server model1.

XE9640 and B25: Similarly, the XE9640 server can also utilize the B25 rail type for secure mounting in a rack1.

XE9680 and B28: Additionally, the XE9680 server is compatible with the B28 rail type, providing an alternative mounting solution1.

It’s important to note that the rail types are specific to the server models and are designed to ensure a secure and stable installation in the customer’s rack. The Dell Rail Sizing and Rack Compatibility Matrix provides detailed information on the compatibility of different server models with their respective rail types. This document should be consulted to verify the correct rail type for each server model before proceeding with the installation1.

Weight and Size of the PowerEdge XE9680 :

The Dell PowerEdge XE9680 server is designed for high performance, which often results in a larger and heavier form factor. Handling such servers typically requires multiple people to ensure safety and prevent damage.

Ergonomic Considerations :

Due to its weight and size, it is crucial to follow proper ergonomic practices when lifting and moving the server. This minimizes the risk of injury and ensures the server is handled safely.

Number of People Required :

For the XE9680, it is recommended to have four people when physically picking up the server to place it on the lift shelf. This recommendation is based on the server's weight and the need to maneuver it safely onto the lift.

Safety and Coordination :

Each person should position themselves on one side of the server, ensuring an even distribution of weight. This coordinated effort helps in lifting the server evenly and reducing the risk of dropping or mishandling it.

Procedure for Lifting :

Two individuals should position themselves at the front corners, and two at the rear corners of the server. On a coordinated count, all four should lift the server together and place it gently onto the lift shelf.

The lift shelf should be stable and able to support the weight of the server once it is placed on it.

Using the Lift :

Once the server is on the lift shelf, it can be maneuvered into the desired position in the rack. Ensure that the lift is rated for the weight of the XE9680 to avoid any mechanical failures.

Reference to Official Documentation :

Dell’s installation guides and service manuals typically provide guidelines on the number of personnel required for handling large and heavy servers, ensuring both safety and compliance with best practices.

References :

Dell EMC PowerEdge XE9680 Installation and Service Manual: This manual provides detailed guidelines on handling and installing the XE9680 server, including the recommended number of personnel required for safe handling.

Dell EMC Technical Specifications Guide: Offers insights into the physical dimensions and weight of the PowerEdge XE9680, informing the need for multiple personnel for safe handling and installation.

The PowerEdge XE9680 server is equipped with power supply units (PSUs) that are essential for its operation. Here’s the power consumption information that the deployment engineer can provide:

PSU Specifications : Each PowerEdge XE9680 server comes with  four 2800-Watt, 15.6 Amp PSUs 1 . This specification is crucial for the data center manager to understand the power requirements for each server.

Total Power Requirement : With two servers per rack, each rack will have a total of  eight 2800-Watt PSUs . This information helps in calculating the total power draw for each rack.

Power Distribution Units (PDUs) : While the number of PDUs required for high availability can vary, it’s important to note that the server’s PSUs feature a  C22 input socket 1 . The data center manager should ensure that the PDUs in the rack are compatible with this type of connection.

Power Planning : The data center manager must plan for the power needed to supply power to the four racks, considering the power draw of the servers and any additional equipment that will be installed.

By providing this detailed power consumption information, the deployment engineer assists the data center manager in planning for the appropriate power infrastructure to support the PowerEdge XE9680 servers.