Ticking Clock Black Friday Special: 75% Off! Apply coupon code below to save on all exam bundles! - Ends in 0d 00h 00m 00s - Coupon code: 75epass

Exact2Pass Menu

HPE Network Data Center Professional Architect Exam

Last Update 1 hour ago Total Questions : 70

The HPE Network Data Center Professional Architect Exam content is now fully updated, with all current exam questions added 1 hour ago. Deciding to include HPE7-A12 practice exam questions in your study plan goes far beyond basic test preparation.

You'll find that our HPE7-A12 exam questions frequently feature detailed scenarios and practical problem-solving exercises that directly mirror industry challenges. Engaging with these HPE7-A12 sample sets allows you to effectively manage your time and pace yourself, giving you the ability to finish any HPE Network Data Center Professional Architect Exam practice test comfortably within the allotted time.

Question # 1

You are replacing the access layer in a customer data center network that uses VMware NSX. The customer has identified several subnets outside the VMware platform for which the customer wants to add overlay routing.

What high-level plan will work for this customer?

A.

Proposing CX switches and a Fabric Composer plug-in to Morpheus VM Essentials, which will create an integrated overlay fabric for all subnets

B.

Proposing CX switches and a Fabric Composer plug-in, which will enable the CX switches to add the subnets in question to the same overlay used by NSX

C.

Proposing CX switches that use EVPN VXLAN to provide a separate overlay fabric for the subnets in question

D.

Proposing CX switches, which will integrate with NSX to provide the desired functionality provided that the customer also add NSX licenses

Question # 2

What is one advantage of using a VSX pair rather than two discrete switches to connect servers, storage, firewalls, and other workloads?

A.

You only need to configure a single routing control-plane.

B.

The setup is much easier since both switches are sharing the same configuration.

C.

Bare metal servers can be connected via MLAGs using LACP.

D.

You can save half the number of licenses needed for AFC.

Question # 3

Refer to the exhibit.

You are designing a data-center network. The customer requests connectivity between the data center and campus core switches. The customer uses VLANs for segmentation, but does not use VRFs.

What is the recommended design for the links between the data-center core switches and the campus core switches?

A.

Each link should be a routed-only port (ROP) in a /31 subnet.

B.

Link 1 and Link 3 should be one VSX LAG. Link 2 and Link 4 should be another VSX LAG.

C.

All links should be in the same VSX LAG.

D.

Link 1 and Link 2 should be one VSX LAG. Link 3 and Link 4 should be another VSX LAG.

Question # 4

Waratah Hospital, located in Australia, plans to move many data-center services to a new facility. (The remaining legacy data center is not included in this project.) Waratah Hospital has hired an external consultant to help design the new data-center network.

Based on the data-center network-infrastructure requirements, the external consultant has produced a high-level design. The following summarizes the design document.

Requirements and information:

Six racks in the data-center room (a single row).

Redundant top-of-rack leaf switches with back-to-front cooling in every rack, providing 10/25 Gbps connectivity to servers, storage, and other devices.

Four 100 GbE uplinks per leaf switch.

The customer requested that all switch ports face the back of the rack racks (hot aisle).

OOB management for servers, storage, and network must be provided through an external switch with back-to-front cooling. This switch must be included in the solution. One OOB switch provides connectivity for two racks.

Core equipment for the OOBM network is being reused.

Middle-of-row spine switches.

The data center must connect to the hospital building using links that provide 400 Gbps.

Internet access is supplied through an existing firewall cluster with two firewalls, with one firewall in each data room. The second firewall operates in standby mode, and VRRP is used on the firewalls for failover. The data-center network must connect to these firewalls using links totaling 100 Gbps.

The external link is a dark-fiber direct link based on single-mode fiber (OS2). The distance to the main hospital is 1.5 KM. The links will terminate on two core switches in the hospital.

The customer also requires:

99.999% uptime for this life-critical environment.

Planned and unplanned downtime must be minimized.

Software upgrades are permitted only once per year with close to zero downtime.

All life-critical resources are accessed locally, and all resources reside within the hospital campus.

Waratah Hospital requires a highly secure data-center environment. Encrypted wire-speed connectivity between the data room and the hospital is mandatory because the link between the buildings crosses a public road.

Waratah Hospital has a mix of virtualized (vSphere) servers, Nutanix storage, bare-metal servers, backup servers, and other devices.

In the past, the hospital experienced a security breach that resulted in data loss, network downtime, and identity theft.

Given the scenario, which environmental requirements are stated? Choose two.

A.

traffic micro-segmentation

B.

encrypted connectivity

C.

switch placement

D.

available power to racks

E.

airflow direction

Question # 5

Refer to the scenario. Given the ServiceNow-integration requirement, which CX feature automatically creates ServiceNow tickets from network events?

A.

NAE

B.

SOAP

C.

probe

D.

REST API

Question # 6

You are selecting switches for a new rack that must support several traffic types, including HTTPS multicast streaming and iSCSI traffic. You are deciding between the CX 8360v2-32Y6C and CX 8325-48Y8C models, both of which satisfy the rack’s port requirements.

Which technical requirement should lead you toward the 8325 model?

A.

A requirement to route the multicast traffic across multiple subnets

B.

A requirement to support a mix of 10GbE and 25GbE server connections

C.

A requirement to allocate two different specific amounts of buffer space to platinum-tier and to gold-tier iSCSI storage

D.

A requirement to support both IP ECN AND PFC

Question # 7

Waratah Hospital, located in Australia, plans to relocate many data-center services to a new facility. (The remaining legacy data center is out of scope for this project.) Waratah Hospital has engaged an external consultant to help design the new data-center network.

Based on the data-center network-infrastructure requirements, the external consultant has produced a high-level design. The design document is summarized below.

Requirements and information:

Six racks in the data-center room (a single row).

Redundant top-of-rack leaf switches with back-to-front cooling in every rack, providing 10/25 Gbps connectivity to servers, storage, and other devices.

Four 100 GbE uplinks for each leaf switch.

The customer requested that all switch ports face the back of the rack racks (hot aisle).

OOB management for servers, storage, and networking must be supplied through an external switch with back-to-front cooling. This switch must be part of the solution. One OOB switch provides connectivity for two racks.

Core equipment for the OOBM network is being reused.

Middle-of-row spine switches.

The data center must connect to the hospital building using links that provide 400 Gbps.

Internet access is supplied through an existing firewall cluster with two firewalls, with one firewall in each data room. The second firewall runs in standby mode, and VRRP is used on the firewalls for failover. The data-center network must connect to these firewalls with links totaling 100 Gbps.

The external link is a dark-fiber direct link using single-mode fiber (OS2). The distance to the main hospital is 1.5 KM. The links will terminate on two core switches in the hospital.

The customer also requires:

99.999% uptime for this life-critical environment.

Planned and unplanned downtime must be minimized.

Software upgrades are permitted only once per year with close to zero downtime.

All life-critical resources are accessed locally, and every resource exists within the hospital campus.

Waratah Hospital requires a highly secure environment for the data center. Encrypted wire-speed connectivity between the data room and the hospital is mandatory because the link between the buildings crosses a public road.

Waratah Hospital has a mix of virtualized (vSphere) servers, Nutanix storage, bare-metal servers, backup servers, and other devices.

Previously, the hospital experienced a security breach that caused data loss, network downtime, and identity theft.

Waratah Hospital requires a high-availability Aruba Fabric Composer deployment. How many nodes does the high-availability option support?

A.

three nodes

B.

high availability is not supported

C.

two nodes

D.

four nodes

Question # 8

Waratah Hospital, located in Australia, plans to relocate many data-center services to a new facility. (The remaining legacy data center is not included in this project.) Waratah Hospital has engaged an external consultant to help design the new data-center network.

Based on the data-center network-infrastructure requirements, the external consultant has produced a high-level design. The design document is summarized below.

Requirements and information:

Six racks in the data-center room (a single row).

Redundant top-of-rack leaf switches with back-to-front cooling in every rack, providing 10/25 Gbps connectivity to servers, storage, and other devices.

Four 100 GbE uplinks per leaf switch.

The customer requested that all switch ports face the rear of the rack racks (hot aisle).

OOB management for servers, storage, and network devices must be provided through an external switch with back-to-front cooling. This switch must be included in the solution. One OOB switch provides connectivity for two racks.

Core equipment for the OOBM network is being reused.

Middle-of-row spine switches.

The data center must connect to the hospital building through links providing 400 Gbps.

Internet access is provided through an existing firewall cluster containing two firewalls, with one firewall in each data room. The second firewall operates in standby mode, and VRRP is used on the firewalls for failover. The data-center network must connect to these firewalls through links totaling 100 Gbps.

The external link is a direct dark-fiber link based on single-mode fiber (OS2). The distance to the main hospital is 1.5 KM. The links will terminate on two core switches in the hospital.

The customer also requires:

99.999% uptime for this life-critical environment.

Planned and unplanned downtime must be minimized.

Software upgrades are allowed only once per year, with close to zero downtime.

All life-critical resources are accessed locally, and all resources reside within the hospital campus.

Waratah Hospital requires a highly secure data-center environment. Encrypted wire-speed connectivity between the data room and the hospital is mandatory because the link between the buildings crosses a public road.

Waratah Hospital has a mix of virtualized (vSphere) servers, Nutanix storage, bare-metal servers, backup servers, and other devices.

In the past, the hospital experienced a security breach that resulted in data loss, network downtime, and identity theft.

Refer to the scenario. A junior colleague recommends deploying CX 8325-32C BF 6F 2AC Bundle switches as border leaf switches. What concern should you raise about this plan?

A.

These switches do not support sufficient power redundancy for the customer’s requirements.

B.

These switches cannot establish 4x 25 GbE links to comply with best practices for connecting to the firewalls.

C.

These switches do not meet all of the customer ' s requirements for the link to the hospital.

D.

These switches are using the wrong airflow for the customers environment.

Question # 9

A customer wants to turn as many upfront costs as possible into smaller recurring bills. For which components can HPE GreenLake for Networking offer recurring billing?

A.

Hardware and support, but not software

B.

Software and support, but not hardware

C.

Hardware, software, and support

D.

Hardware and software, but not support

Question # 10

A customer’s legacy three-tier architecture is being modernized with an L3 spine-and-leaf topology. The CX switches in the topology will supply the overlay. The customer data center has six VRFs. The customer has requested service leaf switches to connect to two clustered firewalls that route and filter traffic between the VRFs.

How can the efficiency of traffic flow between subnets in the same VRF be maximized?

A.

Use the centralized gateway model for these subnets, selecting a different centralized gateway for each VRF

B.

Within each VRF, use the distributed gateway (L3 anycast) model for most subnets but the centralized gateway design for the subnets with the highest security needs

C.

Use the firewall cluster as centralized gateways for these subnets

D.

Use the distributed gateway (L3 anycast) model for these subnets

Go to page: