To establish a secure web connection to YouTube.com, the computer will run two protocols: DNS and HTTPS. DNS (Domain Name System) is a protocol that translates domain names into IP addresses, which are used to identify and locate web servers on the internet. HTTPS (Hypertext Transfer Protocol Secure) is a protocol that encrypts and authenticates data transfer between a web browser and a web server, ensuring the security and integrity of the communication.

The computer does not need to run DHCP (Dynamic Host Configuration Protocol), FTP (File Transfer Protocol), or HTTP5 (a non-existent protocol) to connect to YouTube.com. DHCP is a protocol that assigns IP addresses to devices on a network automatically, but the computer already has a static address configured. FTP is a protocol that transfers files between a client and a server, but it is not used for web browsing. HTTP5 is not a valid protocol name, and it is likely a typo for HTTP (Hypertext Transfer Protocol), which is the unsecure version of HTTPS. References:

• Aruba Certified Network Technician (ACNT) | HPE Aruba Networking
• 6 Network Security Protocols You Should Know | Cato Networks
• What is HTTPS? | Cloudflare

 Adjacent Channel Interference (ACI) is a type of interference that occurs when two or more wireless devices use channels that are close to each other in the same frequency band. ACI reduces the signal quality and throughput of the wireless devices, as they have to compete for the same spectrum and deal with the noise from the neighboring channels12

The 5 GHz band has more non-overlapping channels than the 2.4 GHz band, which means that there is less chance of ACI in the 5 GHz band. However, ACI can still occur in the 5 GHz band if the wireless devices use wider channel bandwidths, such as 40 MHz or 80 MHz, which are supported by 802.11n and 802.11ac standards. Wider channel bandwidths can increase the data rate and performance of the wireless devices, but they also occupy more spectrum and reduce the number of available channels134

Therefore, one condition that allows 5 GHz channels to avoid ACI is to transmit at 20 MHz bandwidth, which is the narrowest channel bandwidth supported by 802.11a/n/ac standards. By transmitting at 20 MHz bandwidth, the wireless devices can use more non-overlapping channels in the 5 GHz band and minimize the impact of ACI. However, this alsomeans that the wireless devices will have lower data rates and performance than using wider channel bandwidths134

Another condition that can help avoid ACI in the 5 GHz band is to use channel bonding, which is a technique that combines two or more adjacent channels into one wider channel. Channel bonding can increase the data rate and performance of the wireless devices, but it also requires careful planning and coordination to avoid overlapping with other wireless devices. Channel bonding can be done with 40 MHz or 80 MHz channel bandwidths, but not with 20 MHz channel bandwidths134 References: 

https://www.ti.com/pdfs/bcg/80211_acr_wp.pdf

https://www.ti.com/pdfs/bcg/80211_acr_wp.pdf

OWE is a Wi-Fi technology that assists with data privacy on open networks by providing unauthenticated data encryption. OWE is based on the standard defined in RFC 8110, which specifies an extension to IEEE 802.11 that uses a cryptographic handshake to encrypt the devices connecting to open network access points. OWE reduces the risk of data exposure or theft when using an open Wi-Fi network, without adding complexity or scalability burdens. OWE is part of the Wi-Fi CERTIFIED Enhanced Open™ program, which is a new certification for Wi-Fi devices that support this technology123 References:

• Wi-Fi CERTIFIED Enhanced Open™: Transparent Wi-Fi … - Wi-Fi Alliance
• Debunking Wi-Fi® Security Myths: Cellular Networks are … - TechSpective
• 10. Use adequate security to send or receive health information over …

A device that provides high ethernet port density for connecting wired clients is a switch. A switch is a device that operates at the data link layer (layer two) of the OSI model and forwards frames between devices on the same network based on their MAC addresses1. A switch can have multiple ports, ranging from 8 to 48 or more, that can connect to various wired devices, such as computers, IP phones, and printers2. A multilayer switch is a switch that can also operate at the network layer (layer three) of the OSI model and perform routing functions based on IP addresses3. Therefore, statements D and E are correct. Statements A, B, and C are incorrect because they describe devices that provide wireless connectivity, not wired connectivity. A wireless router is a device that combines the functions of a router and an access point and provides wireless access to the internet. A router is a device that operates at the network layer (layer three) of the OSI model and forwards packets between different networks based on their destination IP addresses. An access point is a device that connects wireless devices to a wired network and acts as a bridge between the two. References: 1: Aruba Certified Network Technician (ACNT) Study Guide, page 282: Aruba Certified Network Technician (ACNT) Study Guide, page 303: Aruba Certified Network Technician (ACNT) Study Guide, page 32. : Aruba Certified Network Technician (ACNT) Study Guide, page 29. : Aruba Certified Network Technician (ACNT) Study Guide, page 29. : Aruba Certified Network Technician (ACNT) Study Guide, page 94.

The Institute of Electrical and Electronics Engineers (IEEE) is an organization that develops and publishes international standards for various fields of engineering, including electrical, electronic, computer, software, and telecommunications. IEEE standards are widely used and recognized by the industry, academia, and governments. IEEE standards cover topics such as wireless networking, Ethernet, power systems, smart grid, cybersecurity, robotics, biomedical engineering, and more. IEEE standards are developed by consensus among experts from different sectors and regions, and are reviewed and updated regularly to reflect the latest technologies and best practices. IEEE standards aim to promote innovation, interoperability, safety, reliability, and efficiency in engineering applications. References: IEEE Standards Association, IEEE - Wikipedia, IEEE Standards - Creative Safety Supply

ARP is a protocol that maps an IP address to a MAC address, which is the physical address of a device on a network. ARP is necessary because the software address (IP address) of the host or computer connected to the network needs to be translated to a hardware address (MAC address). Without ARP, a host would not be able to figure out the hardware address of another host. ARP works by sending a broadcast message to all devices on the network, asking for the MAC address of the device that has a specific IP address. The device that has that IP address replies with its MAC address, and the sender stores this information in its ARP cache for future use. The sender then uses the MAC address as the destination address of the Layer 2 header that encapsulates the IP packet. The Layer 2 header is also known as the data link layer header, which is responsible for delivering the packet to the correct device on the same network. The Layer 3 header is also known as the network layer header, which is responsible for routing the packet to the correct network. Therefore, the correct answer is C, because ARP is used to discover the destination address of the Layer 2 header that encapsulates IP packets1234 References: What Is Address Resolution Protocol (ARP)? - Fortinet, Address Resolution Protocol - Wikipedia, ARP (Address Resolution Protocol) explained - Study-CCNA, Aruba Certified Network Technician Exam HPE3-U01 Actual Questions

Broadcast communication is the distribution of audio or video content to a dispersed audience via any electronic mass communications medium, using the electromagnetic spectrum (radio waves), in a one-to-many model1. A broadcast message is a message that is sent to all endpoints on the network, regardless of their address or identity2. An example of a broadcast message is an ARP request, which is used to find the MAC address of a device that has a specific IP address3. An ARP request is sent to the broadcast address of the network, which is usually the last address in the subnet (e.g., 192.168.1.255 for a /24 network). All devices on the network receive the ARP request and check if their IP address matches the one in the request. If so, they reply with their MAC address to the sender of the ARP request. If not, they ignore the request4. Therefore, an ARP request is an example of broadcast communication, while the other options are not. A DHCP offer is a message that is sent by a DHCP server to a specific client that requested an IP address5. An ICMP echo is a message that is sent by a device to test the connectivity and latency to another device. An HTTP Get is a message that is sent by a web browser to request a web page from a web server. These messages are not broadcast, but rather unicast, meaning they are sent to a single destination. References: 1: Broadcasting - Wikipedia 2: Broadcast communication network - Wikipedia 3: [Address Resolution Protocol - Wikipedia] 4: [How ARP Works - Cisco] 5: [DHCP - Wikipedia] : [Ping (networking utility) - Wikipedia] : [Hypertext Transfer Protocol - Wikipedia] : https://en.wikipedia.org/wiki/Address_Resolution_Protocol : https://www.cisco.com/c/en/us/support/docs/ip/dynamic-address-allocation- resolution/13718-5.html : https://en.wikipedia.org/wiki/Dynamic_Host_Configuration_Protocol : https://en.wikipedia.org/wiki/Ping_(networking_utility) : https://en.wikipedia.org/wiki/Hypertext_Transfer_Protocol