830-01 Riverbed RCPE Certified Professional WAN Optimization exact Exam Questions

RCPE Certified Professional WAN Optimization

Last Update 1 hour ago Total Questions : 402

The RCPE Certified Professional WAN Optimization content is now fully updated, with all current exam questions added 1 hour ago. Deciding to include 830-01 practice exam questions in your study plan goes far beyond basic test preparation.

You'll find that our 830-01 exam questions frequently feature detailed scenarios and practical problem-solving exercises that directly mirror industry challenges. Engaging with these 830-01 sample sets allows you to effectively manage your time and pace yourself, giving you the ability to finish any RCPE Certified Professional WAN Optimization practice test comfortably within the allotted time.

Question # 61

You have a number of SteelHeads running RiOS 9.x. At each datacenter site, there are a cluster of domain controllers, one of which the SteelHead is connected to. As the volume of users on the network increase, the load which the server-side SteelHeads are placing on the connected domain controller pushes the domain to its limits, and authentication failures sometimes occur. What is the best way to address this?

Increase the time Kerberos tickets are cached for individual users on the SteelHeads.

Identify traffic which does not have a high rate of data reduction, and use in-path rules to path this traffic through.

Disable Kerberos authentication on the SteelHeads so as to down negotiate to NTLM, specifying multiple domain controllers during the domain-join.

Configure domain controller load-balancing so the SteelHead can communicate with multiple domain controllers instead of just one.

Question # 62

A SteelHead is deployed in a VLAN bridge. Which VLAN ID should be configured on the in-path interface to support this environment?

100

200

No configuration is necessary as LAN and WAN interfaces are on access ports

It will require an in-path interface for each VLAN

Question # 63

-- Exhibit –

-- Exhibit --

Refer to the exhibit. According to the log information, what does that message represent? (Select 2)

This Steelhead appliance is closing its out-of-band Splice with the peer Steelhead appliance 172.16.10.101.

This Steelhead appliance is closing its out-of-band Splice with the peer Steelhead appliance 172.16.11.101.

The local Steelhead appliance is 172.16.11.101.

The local Steelhead appliance is 172.16.12.101.

Question # 64

In the SteelHead Mobile client application, the Connection List shows a connection with a green arrow. What does this indicate?

A branch warning optimized connection

A branch mode optimized connection

An unlicensed connection

A pass-through connection

A normal optimized connection

Question # 65

When a SteelHead reaches ‘admission control’, what happens to the network traffic it is processing?

Existing optimized connections continue to be optimized but new connections are passed through.

All existing connections continue to be optimized and new connections are also optimized.

Existing optimized connections are passed through and new connections are optimized.

All connections are reset to clear the alarm.

All new connections are optimized except those which are MAPI pre-population.

Question # 66

-- Exhibit –

-- Exhibit --

In a WCCP environment with R3, SH10 and SH11, it was observed that SH11 ' s WCCP state is " read error " . What is the possible cause?

The Steelhead is not receiving i-see-you messages from the router

The Steelhead is not sending here-i-am messages to the router

The Steelhead is not receiving removal query messages from the router

Everything is in order – working properly

Question # 67

-- Exhibit –

-- Exhibit --

Refer to the exhibit. A Steelhead administrator has recently decided to configure data store synchronization between 2 Steelhead appliances on his data center. After applying the configurations, he noticed that it is not working. According to the logs provided, what would you suggest would fix the problem?

Change the auxiliary ip address on one of the Steelhead appliances.

Configure one Steelhead appliance as backup.

Disable optimization.

Restart services.

Configure one Steelhead appliance as master.

Question # 68

-- Exhibit –

-- Exhibit --

Refer to the exhibit. When USER1 tried to access Server 1, the user sees the shown message on his Steelhead Mobile Client. What does this represent?

The Steelhead Mobile client does not have enough licenses.

The Steelhead Mobile client policy is configured with the " location awareness " feature.

There are pass-through rules not allowing optimization.

The Steelhead Mobile client did not initialize properly and needs to be reset.

Question # 69

Citrix optimization does not work although you removed ports 1494 and 2598 from the Interactive Ports label and enabled Citrix optimization on the client-side Steelhead appliance. What could be the problem? (Select 2)

You need to enable Citrix optimization on the server-side Steelhead appliance.

Secure ICA encryption needs to be enabled.

Citrix CDM optimization needs to be enabled.

You need to restart the optimization service.