830-01 Riverbed RCPE Certified Professional WAN Optimization exact Exam Questions

RCPE Certified Professional WAN Optimization

Last Update 1 hour ago Total Questions : 402

The RCPE Certified Professional WAN Optimization content is now fully updated, with all current exam questions added 1 hour ago. Deciding to include 830-01 practice exam questions in your study plan goes far beyond basic test preparation.

You'll find that our 830-01 exam questions frequently feature detailed scenarios and practical problem-solving exercises that directly mirror industry challenges. Engaging with these 830-01 sample sets allows you to effectively manage your time and pace yourself, giving you the ability to finish any RCPE Certified Professional WAN Optimization practice test comfortably within the allotted time.

Question # 81

Refer to the exhibit.

A connection times out when Client41 and Client42 attempt to either establish an HTTP session to Server31 or an FTP connection to Server32 after not connecting to them for some time. The very next attempt to connect to these services done immediately after the failure seems to work correctly. The clients are able to ping both servers and no access-lists are configured on the routers. SH3 uses the IP address of R3f0 as its default gateway. Upon powering off SH3 and SH4, the problem goes away even for first connection and everything works normally (even after not connecting for extended periods of time). Which of the following are likely to correct this problem?

Both servers have faulty network interface cards and should be replaced

Both the HTTP service running in Server31 and the FTP service running in Server32 are down and should be restarted

A more specific static route pointing to Subnet 31 is not configured at SH3

A more specific static route pointing to Subnet 31 is not configured at R3

A more specific static route pointing to Subnet 31 is not configured at L3 Switch

Question # 82

Which are true about the Steelhead appliance backups taken and stored by the CMC appliance? (Select 3)

They are text file snapshots of the current running configuration taken at 3 a.m. (by default)

The CMC appliance creates hyperlinks of the backups for easy viewing with a Web browser

The configurations can be copied from the CMC appliance back to the Steelhead appliance via SCP

There is a limit of five configurations per Steelhead appliance that can be stored at any one time in a rolling queue

The Steelhead configuration files can be edited on the CMC appliance

Question # 83

After deploying the Steelhead appliances in-path, you are not seeing any optimization between 10.11.0.128 and 10.11.23.18.

Look at the following trace in the exhibit and explain why: (HINT: Look at the SYN packet)

There is a spanning-tree loop

The cables are reversed

The three way hand-shake is not being completed

The client and servers are on the same /16 subnet

There is no SYN/ACK from 10.11.23.18

Question # 84

In a new physical in-path deployment, you realize that a Steelhead appliance at one of your branch offices is optimizing connections from other sites, however, no connections initiated from that branch office are being optimized. Which of the following is the most likely cause of this problem?

Duplex mismatch

Bilateral Opportunistic Lock failure

Policy-based routing incorrectly configured

Reversed WAN and LAN cabling

Question # 85

What should you do when you receive the following message?

Nothing. This is a warning message which means that the Steelhead appliance is resetting an internal state regarding this connection and it should not affect user performance.

Switch off the Steelhead appliance

Create a specific pass-through rule to bypass the above source and destination hosts

Reload the Steelhead appliance

Question # 86

You have an in-house HTTP application running on port 8443 but you are not seeing HTTP optimization. You checked and made sure that the HTTP blade is enabled. What is the likely problem?

Primary port needs to be on the LAN side of the Steelhead

There is a separate license key for the HTTP blade

The HTTP blade will only work on port 80 and 8080 and can not be changed

The HTTP blade only supports HTTP 1.1 and the application is using HTTP 1.0

HTTP blade is enabled by default on port 80 and 8080. An in-path rule is necessary for all other ports.

Question # 87

How many failover buddies can be configured for a single Interceptor?

No limit

Question # 88

On the Interceptor appliance, the Neighbor Peers page shows which of the following?

Optimized connections, Admission Control connection count

Optimized connections, Pass-through connections count

Current Connections per Second (CPS), Admission Control count

Packets per second, Connections per Second, Optimized connections count

Question # 89

What are the four types of policies on a CMC appliance?

Networking, Optimization, Software, System

Networking, Optimization, Rules, System

Networking, Optimization, Security, System

Networking, Acceleration, Security, System

Question # 90

In a new in-path deployment, connections are listed as pass-through on the branch office Steelhead appliance. Which of the following is the likely cause of the problem?

1) Pass-through rule preventing optimization

2) Server-side Steelhead appliance is down

3) Satellite proxy not copying auto-discovery probes

4) Asymmetric routing is detected for the client/server flow

5) Duplex mismatch on WAN or LAN interface

3, 2

2, 4

1, 2, 5

1, 2, 3, 4

1, 2, 3, 4, 5

Go to page: