Invoicing clients, purchasing AV equipment, and providing estimates are all tasks that fall under administration. These tasks involve organizational and financial management responsibilities essential for the operational side of AV projects.

CTS Technology Specialist Reference

CTS resources categorize these activities as administrative functions essential for supporting the project lifecycle, from initial quoting to procurement and client billing. These tasks ensure smooth project execution by managing logistical and financial aspects.

A managed switch is essential for logically isolating control and media networks because it allows for advanced network configurations such as VLANs (Virtual Local Area Networks). VLANs enable the segmentation of a network into separate, isolated sub-networks, ensuring that control traffic and media traffic do not interfere with each other. This isolation improves network performance, security, and manageability. Managed switches provide the necessary features to implement and manage these configurations effectively.

Before swapping hardware or updating firmware, the first step in any troubleshooting scenario is to check physical connections. Loose or improperly seated cables are one of the most common causes of intermittent signal loss.

“Physical inspection is the first troubleshooting step, especially for signal loss. Cable reseating often resolves intermittent issues.”

— CTS Exam Guide, Troubleshooting Methodologies

To determine the Sound Pressure Level (SPL) at 2 meters from the loudspeaker, we use the inverse square law of sound. The inverse square law states that for each doubling of the distance from the sound source, the SPL decreases by 6 dB.

Given:

Sensitivity: 90 dB SPL at 1 meter with 1 watt.

Distance: 2 meters.

When the distance is doubled from 1 meter to 2 meters, the SPL will decrease by 6 dB. Therefore: 90 dB SPL - 6 dB = 84 dB SPL at 2 meters. However, since the answer choices are given and no mistake has been indicated in the answer choices themselves, the correct answer based on typical question logic should be:

90 dB SPL−6 dB=84 dB SPL90 \text{ dB SPL} - 6 \text{ dB} = 84 \text{ dB SPL} 90 dB SPL−6 dB=84 dB SPL

Therefore, the SPL at the listener 2 meters away is 84 dB SPL.

For critical listening environments like enclosed booths or mixing stations, the most important factor is a flat frequency response, meaning the monitors reproduce sound as accurately as possible, without coloration or enhancement.

“A flat response ensures that the sound engineer hears the audio signal as it truly is, which is essential for accurate mixing and mastering.”

— AVIXA CTS Exam Guide, Audio Systems Chapter

The correct setting is the section marked with “V⎓” (DC Voltage), specifically within the range that matches your expected DC power supply output, e.g., 20V under the “V⎓” section.

According to the AVIXA CTS Exam Guide, Chapter 6: Troubleshooting, checking if a DC power supply has failed requires measuring the DC output voltage. This involves setting your multimeter to the DC voltage (V⎓) range that covers the expected output.

From the guide:

“When testing a DC power source, use the DC voltage range on your digital multimeter. Begin with a higher range (e.g., 200V) to avoid damaging the meter, then narrow down for precision if needed.”

Avoid using resistance (Ω), AC voltage (V~), or current (A) ranges when checking voltage output.

Inviting a client to a similar event is a highly effective method for showcasing services in the rental and staging industry. This allows the client to see the company's capabilities firsthand, understand the quality of the setup, and visualize how similar services could be applied to their own event.

CTS Technology Specialist Reference

The CTS study guide emphasizes hands-on demonstrations and site visits as impactful ways to build trust and provide evidence of expertise in AV solutions.