Summer Special Sale Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: buysanta

Exact2Pass Menu

Question # 4

A gateway needs to have two doors connected to it. Each door has a reader, a maglock, a REX, and a contact closure. Can these doors be connected to a single gateway?

A.

No, they will need an additional reader or input module.

B.

No, a gateway cannot have two locks associated with it.

C.

Yes, the gateway has enough power to power both readers and both locks.

D.

Yes, but you will need to reassign the tamper or power fail inputs to accommodate the fourth input.

Full Access
Question # 5

You need to design a 31-door, networked Cisco Physical Access Control Gateway system. Each door will be controlled by a Cisco Access Gateway, and each Cisco Access Gateway will require its own IP address. Due to the limited number of available IP addresses, the network admin has decided to implement variable-length subnet mask (VLSM) in order to better allocate the available address space. What is the most efficient subnet mask that can be used to handle the 31 IP addresses that are needed for the Cisco Access Gateways?

A.

255.255.255.128 : /25

B.

255.255.255.192 : /26

C.

255.255.255.224 : /27

D.

255.255.255.240 : /28

Full Access
Question # 6

How should NTP be implemented in a Cisco Physical Access Control Gateway design?

A.

NTP is not required.

B.

NTP should be configured for the Cisco PAM Server only.

C.

NTP should be configured for Cisco Physical Access Control Gateways only.

D.

NTP should be configured on Cisco PAM Servers and gateways.

Full Access
Question # 7

When a 24 VDC fail safe lock is being used to secure a door, how should power be supplied to the lock from the control source?

A.

connected +24 VDC directly to the lock

B.

connected +24 VDC through common and normally close

C.

connected +24 VDC through common and normally open

D.

connected +5 VDC binary control signaling

Full Access