Task 11

You are preparing to connect your on-premises network to VNET4 by using a Site-to-Site VPN. The on-premises endpoint of the VPN will be created on a firewall named Firewall 1.

The on-premises network has the following configurations:

• Internal address range: 10.10.0.0/ 16.

• Firewall 1 internal IP address: 10.10.1.1.

• Firewall1 public IP address: 131.107.50.60.

BGP is NOT used.

You need to create the object that will provide the IP addressing configuration of the on-premises network to the Site-to-Site VPN. You do NOT need to create a virtual network gateway to complete this task.

Task 9

You need to ensure that subnet4-3 can accommodate 507 hosts.

You have an on-premises datacenter named DC1 that contains two routers

You have an Azure subscription. The subscription contains a virtual network named VNet1 and a zone-redundant ExpressRoute virtual network gateway named GW1 that uses the ErGw3Az SKU. GW1 is attached to VNet1.

DO is connected to VNet1 by using an ExpressRoute Standard circuit named Circuits The DC1 routers are configured as endpoints for Circuit1. Circuit1 traffic traverses two physical links.

During a link outage, the connection takes three minutes to fail over

You need to ensure that failovers between the links take less than one second

What should you do?

You have an on-premises VPN appliance named GW1.

You have an Azure subscription that contains an Azure VPN gateway named VPNGW1. VPNGW1 connects to GW1.

You need to modify the IKEv2 encryption algorithm used by VPNGW1 and GW1.

Which PowerShell cmdlet should you run? To answer, select the appropriate options in the answer area.

NOTE Each correct selection is worth one point.

For each of the following statements, select Yes if the statement is true. Otherwise, select No.

NOTE: Each correct selection is worth one point.

You need to meet the network security requirements for the NSG flow logs.

Which type of resource do you need, and how many instances should you create? To answer, select the appropriate options in the answer area.

NOTE: Each correct selection is worth one point.

You plan to deploy Azure Virtual WAN.

You need to deploy a virtual WAN hub that meets the following requirements:

Supports 10 sites that will connect to the virtual WAN hub by using a Site-to -Site VPN connection

Supports 8 Gbps of ExpressRoute traffic

Minimizes costs

What should you configure? To answer, select the appropriate options in the answer area.

NOTE: Each correct selection is worth one point.

You have an Azure subscription that contains a virtual network name Vnet1. Vnet1 contains a virtual machine named VM1 and an Azure firewall named FW1.

You have an Azure Firewall Policy named FP1 that is associated to FW1.

You need to ensure that RDP requests to the public IP address of FW1 route to VM1.

What should you configure on FP1?

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You have an Azure subscription that contains the following resources:

* A virtual network named Vnet1

* A subnet named Subnet1 in Vnet1

* A virtual machine named VM1 that connects to Subnet1

* Three storage accounts named storage1, storage2. and storage3

You need to ensure that VM1 can access storage1. VM1 must be prevented from accessing any other storage accounts.

Solution: You create a network security group (NSG). You configure a service tag for MicrosoftStorage and link the tag to Subnet1.

Does this meet the goal?

You have the Azure environment shown In the Azure Environment exhibit. (Click the Azure Environment tab.) The settings for each subnet are shown in the following table.

The Firewalls and virtual networks settings for storage1 are configured as shown in the Storage1 exhibit. (Click the Storage1 tab.) For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.