According to the LeadingGreen Guide:

“Individual controls for lighting have a significant effect on occupants’ comfort. Meeting the unique needs of each occupant can be accomplished through effective design of lighting controls…”

LEED credits under EQc6 emphasize providing lighting comfort and energy savings through such controls.

ASHRAE 189.1 is a standard for the design of high-performance green buildings that covers various aspects of sustainability, energy efficiency, water efficiency, indoor environmental quality, and more. It is an alternate compliance path for the IGCC, which is a model code that contains minimum requirements for green building design and construction. In jurisdictions that adopt the IGCC, a builder has the option to design and construct a building in accordance with the provisions of ASHRAE 189.1 rather than those of the IGCC123.

ASHRAE Standard 189.1-2014: Standard for the Design of High-Performance Green Buildings Except Low-Rise Residential Buildings (ASHRAE 189.1) | US EPA Smart Growth1

ASHRAE Standard 189.1-2014 - Trane Heating & Air Conditioning2

IgCC and ASHRAE Standard 189.1 Technical Provisions3

Rainwater storage cisterns are components of a collected rainwater irrigation system that are most likely to make it cost prohibitive over a conventional system in a large site that has a short, intense rainy season and a long, dry season. A collected rainwater irrigation system is a system that collects, stores, and distributes rainwater for irrigation purposes. Rainwater storage cisterns are containers that store the collected rainwater until it is needed for irrigation. In a large site that has a short, intense rainy season and a long, dry season, the rainwater storage cisterns would need to be very large and durable to capture and store enough rainwater for the dry season. This would increase the initial cost and maintenance cost of the system compared to a conventional system that uses potable water or groundwater for irrigation1 . References: LEED v4 Green Associate Candidate Handbook1, EPA’s Rainwater Harvesting

To maintain the LEED Green Associate credential, you must earn 30 continuing education hours every two years, with at least six of those hours being LEED specific. This requirement ensures that LEED Green Associates stay up-to-date with the latest developments in green building practices and LEED rating systems. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

Building orientation is the element of design that can be used to take advantage of natural ventilation, solar energy and daylight. Building orientation refers to the position and direction of a building in relation to the sun, wind, and other environmental factors. By orienting a building properly, it can maximize the benefits of passive design strategies such as daylighting, natural ventilation, and solar energy. For example, a building can be oriented to face the south or north in temperate climates to capture more sunlight for heating and lighting, or to face the east or west in hot climates to avoid excessive solar heat gain and glare. A building can also be oriented to align with the prevailing wind direction to enhance natural ventilation and cooling. Building orientation can also affect the shape, size, and placement of windows, doors, roofs, and other architectural elements that influence the performance and comfort of a building. References: Passive Design Strategies | Sustainability Workshop, section “Building Massing & Orientation”; Back to Basics: Natural Ventilation and its Use in Different Contexts | ArchDaily, section “Orientation”; Courtyard configuration to optimize shading, daylight and ventilation …, section “Introduction”

A life-cycle assessment (LCA) is a strategy that can help an owner of newly acquired land design a building that uses materials that have minimal impact on the environment. An LCA is a method that evaluates the environmental impacts of a product or material over its entire life cycle, from extraction to disposal. An LCA can measure the impacts on various categories, such as energy use, water use, greenhouse gas emissions, resource depletion, and waste generation. An LCA can help compare different products or materials based on theirenvironmental performance and select the ones that have the lowest impact13. References: LEED v4 Green Associate Candidate Handbook1, EPA’s Life CycleAssessment3

Renovating an existing building using recycled and salvaged building materials is an example of a life-cycle approach to development or design. A life-cycle approach is an approach that considers the environmental impacts of a product or a project from cradle to grave, or from extraction of raw materials to disposal or reuse. Renovating an existing building using recycled and salvaged building materials reduces the environmental impacts associated with new construction, such as land use change, resource depletion, energy consumption, waste generation, and greenhouse gas emissions.The LEED Green Associate Candidate Handbook states that one of the intents of the Materials and Resources category is to “promote life-cycle assessment as a means of evaluating environmental impacts” [1, p. 15]. References: LEED Green Associate Candidate Handbook, [Life Cycle Assessment | U.S. Department of Energy]

Retrocommissioning is a process applied to existing buildings to ensure that they continue to perform optimally for the current use. This process involves checking systems to see if they function as intended, making necessary repairs or improvements, and ensuring that building staff are trained in the operation and maintenance of systems. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources