Low-emitting materials, including partitions, are intended to:

“...reduce concentrations of chemical contaminants that can damage air quality, human health, productivity, and the environment.”

VOCs are a major indoor air contaminant addressed under the Indoor Environmental Quality category.

The Forest Stewardship Council (FSC) is an independent, non-governmental organization that promotes responsible management of the world’s forests. FSC sets standards for forest management that ensure environmental, social, and economic benefits for present and future generations. FSC also certifies forest products that meet its standards through a chain of custody system that tracks the origin and processing of the products. A wood product that is certified by FSC is guaranteed to be harvested from a well-managed source that protects biodiversity, respects indigenous rights, maintains forest productivity, and supports local communities1 . References: LEED v4 Green Associate Candidate Handbook1, FSC’s What We Do

The " Built Project " falls under LEED for Neighborhood Development (LEED ND), which focuses on sustainable community development and infrastructure​​.

A drip irrigation system provides maximum water efficiency for a building irrigation system. A drip irrigation system delivers water directly to the root zone of plants, minimizing evaporation, runoff, and overspray. This reduces water consumption and prevents water pollution from fertilizers and pesticides. The LEED Green Associate Candidate Handbook states that one of the strategies for achieving water efficiency in landscaping is to “use efficient irrigation systems, such as drip irrigation” [1, p. 14]. References: LEED Green Associate Candidate Handbook, [Drip Irrigation | U.S. Department of Agriculture]

Placing grilles, grates or mats at all major entrances is an example of permanent entryway systems used to reduce dust, dirt and contaminants brought into a facility. Permanent entryway systems are designed to capture dirt and particulates from people’s shoes and prevent them from entering the indoor environment. This improves the indoor air quality and reduces the need for cleaning and maintenance. The LEED Green Associate Candidate Handbook states that one of the strategies for achieving indoor environmental quality is to “use permanent entryway systems (grilles, grates, mats) to reduce particulate matter being brought into buildings at regular entryways” [1, p. 16]. References: LEED Green Associate Candidate Handbook, [Indoor Environmental Quality | U.S. Green Building Council]

LEED uses specific ASHRAE standards for energy and indoor air quality:

“ASHRAE 90.1-2010 is used for Minimum Energy Performance...”

“ASHRAE 62.1-2010 is used for Minimum Indoor Air Quality Performance...”

SMACNA is related to construction air quality, not performance standards.

Installing new flush valves or flow restrictors is a low-cost strategy to improve water efficiency. These devices reduce the amount of water used in each flush or flow, leading to significant water savings over time. Other strategies like installing subsurface cisterns to collect stormwater, using only compostable toilets throughout the facility, or incorporating an on-site blackwater treatment system can also improve water efficiency, but they typically involve higher upfront costs. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

Chlorofluorocarbons (CFCs) are the class of refrigerants that contribute the most to ozone depletion potential (ODP). Ozone depletion potential is a measure of how much a substance can damage the ozone layer in the stratosphere, which protects life on Earth from harmful ultraviolet radiation. CFCs are synthetic chemicals that contain chlorine, fluorine, and carbon atoms. They were widely used as refrigerants, aerosol propellants, solvents, and foam blowing agents until they were phased out by the Montreal Protocol due to their high ODP. The LEED Green Associate Candidate Handbook states that one of the strategies for achieving energy and atmosphere efficiency is to “eliminate chlorofluorocarbons (CFCs) in new building HVAC & R systems” [1, p. 15]. References: LEED Green Associate Candidate Handbook, [Ozone Depletion Potential | U.S. Environmental Protection Agency]

LEED allows flexibility:

“If a project has overlapping eligibility, the project team must choose the rating system that best aligns with the majority of the project scope.”

The team determines applicability based on scope and use.

Closed systems are systems that promote the conservation of materials and resources by linking elements in order to form relationships with their function. Closed systems aim to minimize waste, energy loss, and environmental impact by reusing, recycling, or regenerating materials within the system boundaries. Closed systems can be inspired by natural ecosystems, where waste from one process becomes food for another process. An example of a closed system is a building that collects rainwater for irrigation, uses solar panels for electricity, composts organic waste forfertilizer, and recycles greywater for flushing toilets1 . References: LEED v4 Green Associate Candidate Handbook1, Biomimicry Institute’s What is Biomimicry?