A common performance issue for Lambda functions that access relational databases is the overhead of establishing a new database connection on every invocation . In the provided pseudocode, each call to lambda_handler opens a connection, executes one statement, and closes the connection. When the function runs hundreds of times per hour , repeatedly creating and tearing down connections adds latency (TCP handshake, TLS negotiation if used, authentication, database session setup), and can also increase load on the database connection manager.

AWS guidance for Lambda execution environments explains that the runtime environment may be reused across multiple invocations of the same function (a “warm” execution environment). Code that is initialized outside the handler runs once per execution environment lifecycle and can be reused on subsequent invocations in that environment. By moving database.connect() into the global scope (module-level initialization), the function can reuse an existing connection when the execution environment is warm, reducing per-invocation latency and improving overall throughput.

This change directly targets the slow part of the flow (connection setup) without changing the database engine, resizing the database, or adding unrelated concurrency settings. Increasing reserved concurrency (A) controls scaling limits but does not reduce the per-invocation connection overhead; it can even amplify connection storms. Resizing the database (B) might help capacity, but it does not address the repeated connection establishment cost and is not the first optimization. Replacing RDS with DynamoDB (D) is a major redesign and unnecessary for the stated issue.

So the best improvement, with minimal code change and aligned with Lambda best practices, is option C : create the connection outside the handler and reuse it when possible, while still handling retries and reconnect logic if the connection becomes stale.

The solution that will meet the requirements is to use multiple stages in API Gateway. Create a Lambda function for each environment. Configure API Gateway stage variables to route traffic to the Lambda function in different environments. This way, the company can test the code in a dedicated, monitored test environment before releasing it to the production environment. The company can also use stage variables to specify the Lambda function version or alias for each stage, and avoid hard-coding the Lambda function name in the API Gateway integration. The other options either involve using a single stage in API Gateway, which does not allow testing in different environments, or adding different code blocks for different environments in the Lambda function, which increases complexity and maintenance.

The type of keys that the developer should use to meet the requirements is symmetric customer managed keys with key material that is generated by AWS. This way, the developer can use AWS Key Management Service (AWS KMS) to encrypt the data with a symmetric key that is managed by the developer. The developer can also enable automatic annual rotation for the key, which creates new key material for the key every year. The other options either involve using Amazon S3 managed keys, which do not support automatic annual rotation, or using asymmetric keys or imported key material, which are not supported by S3 encryption.

Comprehensive Detailed Step by Step Explanation with All AWS Developer References:

When you need to provide an AWS Lambda function access to private resources in a VPC, the most common and straightforward approach is to attach the Lambda function to a VPC via private subnets. Once the Lambda function is associated with the VPC, you need to configure appropriate security groups to control the access to the private resources.

Lambda with VPC Access: Lambda functions can be attached to private subnets in a VPC, allowing them to access resources like RDS, EC2, or internal services within that VPC.

Security Groups: A security group acts as a virtual firewall for the Lambda function, ensuring that it can access only the necessary resources and ports in the VPC.

Alternatives:

Option B involves routing traffic through a VPN, which adds unnecessary complexity and operational overhead compared to simply attaching the Lambda to the VPC.

Option C requires configuring a VPC endpoint and a NAT gateway, which can be complex and costly.

Option D refers to AWS PrivateLink, which is used to access services over private connections, but it ' s unnecessary in this scenario unless you need a cross-VPC connection.

Lambda functions in a VPC

Amazon API Gateway is a service that enables developers to create, publish, maintain, monitor, and secure APIs at any scale. Amazon CloudFront is a content delivery network (CDN) service that can improve the performance and security of web applications. The developer can use CloudFront and a custom domain name for the API Gateway REST API. To do so, the developer needs to import the SSL/TLS certificate into AWS Certificate Manager (ACM) in the us-east-1 Region. This is because CloudFront requires certificates from ACM to be in this Region. The developer also needs to create a DNS CNAME record for the custom domain that points to the CloudFront distribution.

AWS CloudFormation is a service that allows developers to model and provision AWS resources using templates. A CloudFormation template can define the load test resources, such as EC2 instances, load balancers, and Auto Scaling groups. A CloudFormation stack set is a collection of stacks that can be created and managed from a single template in multiple Regions and accounts. The AWS CLI create-stack-set command can be used to create a stack set from a template and specify the Regions where the stacks should be created. Reference: Working with AWS CloudFormation stack sets

Option A is correct because DynamoDB uses cursor-style pagination through LastEvaluatedKey and ExclusiveStartKey. For an infinite scrolling feed, the application should request an initial page of results, then use the returned LastEvaluatedKey as the ExclusiveStartKey for the next query. AWS documentation explicitly states that the LastEvaluatedKey from a Query response should be used as the ExclusiveStartKey in the next Query request. This is the native DynamoDB pagination pattern and requires the least operational work. Full table scans to calculate offsets are inefficient and expensive at scale. Client-side pagination after retrieving all items is also inefficient and can break with large datasets. Storing page numbers manually recreates relational offset pagination and is fragile when feed data changes.

===============

Comprehensive and Detailed Explanation (250–300 words) From Exact Extract of AWS Developer Documents:

AWS Secrets Manager is designed to securely store, rotate, and manage sensitive information such as API keys, database credentials, and tokens. A core feature of Secrets Manager is secret versioning , which enables recovery from failed or partial rotation events. Each secret version is associated with staging labels , most notably AWSCURRENT and AWSPREVIOUS .

According to AWS documentation, during a successful rotation, Secrets Manager creates a new secret version and assigns it the AWSCURRENT label, while the previous version is retained with the AWSPREVIOUS label. Applications that retrieve secrets typically reference the secret using the AWSCURRENT label. If a rotation fails after updating the secret value but before synchronizing the change with the external system, authentication failures can occur.

AWS explicitly states that in such scenarios, customers can restore service quickly by moving the AWSCURRENT label back to the previous version . This rollback capability allows applications to immediately resume using the last known valid credentials without modifying application code, redeploying resources, or interacting with external systems.

This approach represents the least operational overhead because it is a metadata-only operation within Secrets Manager. No new secrets are created, no Lambda functions are invoked, and no manual updates are required in the external REST services. Additionally, AWS recommends postponing troubleshooting until service availability is restored, which aligns precisely with the requirement in this scenario.

Other options introduce unnecessary complexity, increased risk of human error, and longer recovery times. Therefore, rolling back to the last working secret version is the fastest, safest, and AWS-recommended solution.

The solution that will meet the requirements is to create an Amazon EventBridge rule that runs on a regular schedule to invoke the Lambda function. This way, the developer can use an automated and serverless way to invoke the function every 10 minutes. The developer can also use a cron expression or a rate expression to specify the schedule for the rule. The other options either involve using an Amazon EC2 instance, which is not serverless, or using environment variables or query parameters, which do not trigger the function.

For asynchronous Lambda invocations, AWS provides Lambda Destinations , which can route the result of every invocation to different targets based on outcome. Destinations support separate configuration for on-success and on-failure , and they send a structured payload that includes metadata and the function response (or error information). This payload is delivered as a JSON document , satisfying the requirement to record function responses in JSON format while also capturing every invocation record.

Option B matches this pattern directly: configure an on-failure destination (S3) and an on-success destination (SNS). With this configuration, each async invocation that succeeds results in a JSON record being delivered to the SNS topic, enabling downstream processing, notifications, or fan-out to other services. Each async invocation that fails results in a JSON record being delivered to S3, which provides durable, cost-effective storage for later analysis or replay workflows. This design requires minimal code changes because the routing is handled by Lambda’s destination configuration rather than custom logic in the function.

Option C relies on a DLQ for failures but then requires custom code to store success records in DynamoDB, increasing development effort and operational complexity. Option A is not aligned: canary deployments and log groups do not provide “multiple destinations per invocation outcome,” and CloudWatch Logs do not natively separate success/failure records as destinations with structured invocation payloads. Option D proposes OpenSearch as a success destination, but Lambda Destinations do not use OpenSearch directly as a destination target; the supported destination types are typically SQS, SNS, EventBridge, and Lambda , and you can store records in S3 through other integrations. Therefore, the best match that uses built-in destinations and records JSON invocation results is B .

Amazon S3 performance scales automatically. Each prefix in an S3 bucket can handle at least 3,500 PUT/COPY/POST/DELETE and 5,500 GET requests per second. There are no limits to the number of prefixes in a bucket. To increase parallel throughput, a developer should partition the data into multiple prefixes. This distributes the request load across multiple partitions of the S3 index, effectively scaling the performance of the application.

The requirement is encryption in transit for sensitive data sent in API calls between two Apache-based EC2 fleets in peered VPCs . The most operationally efficient approach is to restrict network access and rely on standard TLS at the application layer. Among the provided options, the only operationally simple and directly relevant network control is security group referencing across VPC peering within the same account and Region.

By creating security groups that allow inbound traffic only from the other fleet’s security group , the developer ensures that only the intended instances can communicate over the required ports (for example, 443 for HTTPS). This is operationally efficient because it avoids managing IP allowlists that change with Auto Scaling and keeps the trust boundary tied to instance membership rather than addresses. It also supports least privilege by limiting which sources can reach the service.

Why the other options are not the best fit:

B (Site-to-Site VPN) is unnecessary for VPC peering in the same account/Region and adds significant operational overhead. It also does not replace the need for TLS at the application layer to guarantee encryption to the endpoint.

C (EBS encryption) addresses encryption at rest on volumes, not encryption in transit between fleets.

D (Nitro Enclaves) is heavy and unrelated to the core requirement; enclaves protect data-in-use and do not replace standard TLS for network encryption.

Important nuance: Security groups alone do not encrypt traffic; encryption is achieved by using HTTPS/TLS between the Apache services. However, option A is the most operationally efficient control offered here to implement secure connectivity between the fleets (paired with using HTTPS on Apache, which is the standard for encrypting API calls).

Therefore, A best meets the requirement with the least operational complexity.

AWS Lambda supports versions and aliases to manage deployments safely. An alias is a named pointer to a specific function version (for example, prod → version 5). Importantly, Lambda aliases can be configured with routing configuration to split incoming invocation traffic between two versions. This enables canary or linear deployments where most traffic goes to the stable version and a small percentage goes to the new version for testing. If issues occur, the developer can quickly shift traffic back by updating the alias.

Option B is the native, simplest, and recommended solution for Lambda traffic shifting.

Option A is not correct because Route 53 weighted routing can split DNS queries between endpoints, but it does not natively target Lambda versions directly for most invocation patterns, and it’s not the standard mechanism for Lambda version traffic shifting.

Option C is unnecessary and adds operational overhead. ALB can invoke Lambda targets, but splitting between Lambda versions is more naturally handled by aliases without provisioning and managing an ALB.

Option D misunderstands layers: layers are for dependencies/shared code, not for deploying new versions or traffic splitting.

Therefore, using a Lambda alias with weighted routing between versions meets the requirement.

IAM Roles for EC2: IAM roles are the recommended way to provide AWS credentials to applications running on EC2 instances. Here ' s how this works:

You create an IAM role with the necessary permissions to access the target S3 bucket.

You create an instance profile and associate the IAM role with this profile.

When launching the EC2 instance, you attach this instance profile.

Temporary Security Credentials: When the application on the EC2 instance needs to access S3, it doesn ' t directly use access keys. Instead, the AWS SDK running on the instance retrieves temporary security credentials associated with the role. These are rotated automatically by AWS.

Amazon Machine Images (AMIs) are encrypted snapshots of EC2 instances that can be used to launch new instances. The developer can create new AMIs from the existing instances and specify encryption parameters. The developer can copy the encrypted AMIs to the destination Region and use them to create a new application stack. The developer can delete the unencrypted AMIs after the encryption process is complete. This solution will meet the encryption requirement and allow the developer to expand the application to run in the destination Region.