Static IP addressing for servers in campus network planning is crucial for maintaining stable network access to server resources. Static IPs ensure that critical devices like servers have fixed addresses, allowing for predictable network access and reducing potential IP conflicts, which enhances network reliability. This practice is endorsed in Huawei ' s guidelines for effective campus network design and is considered a best practice for managing servers on a network​.

B (Correct) - HTTP: Uses TCP port 80 for web traffic.

C (Correct) - FTP: Uses TCP ports 20/21 for file transfer.

A (Incorrect) - TFTP: Uses UDP port 69, not TCP.

D (Incorrect) - Ping: Uses ICMP, which is neither TCP nor UDP.

Thus, the correct answers are B and C.

Detailed Explanation:Wi-Fi 6 refers to the IEEE 802.11ax standard, which improves the efficiency, capacity, and performance of wireless networks, especially in dense environments​.

Understanding Trunk Ports:

Trunk ports carry traffic from multiple VLANs.

Native VLAN (PVID) frames are sent untagged on the trunk.

Breakdown of Configuration:

port link-type trunk → Interface operates as a trunk.

port trunk pvid vlan 10 → Sets VLAN 10 as the native VLAN.

port trunk allow-pass vlan 10 20 30 40 → Allows traffic from VLANs 10, 20, 30, and 40.

Conclusion:

Since VLAN 10 is the PVID (native VLAN), frames from this VLAN are sent untagged.

Correct answer is A (VLAN 10).

For link aggregation (such as LACP) to function properly, the physical interface rates and duplex modes on each end of the aggregated link must match. This alignment ensures smooth data transfer across the aggregated link, as mismatched settings would lead to connectivity issues or performance degradation​.

Detailed Explanation:Local Area Networks (LANs) cover a small geographic area, such as a home or office. They typically connect computers and devices within a limited area, such as a single building. In this case, both a home network and an office network of a company qualify as LANs. On the other hand, a Metropolitan Area Network (MAN) covers a city-wide area, and the Internet is a global network, so these are not LANs .

Comprehensive and Detailed Explanation:

A static route requires the following essential parameters:

Destination Network → The network to reach (e.g., 10.1.1.0/24). ✅

Next-hop IP Address → The next router to forward traffic (e.g., 192.168.1.1). ✅

Outbound Interface → Instead of a next-hop, an interface (e.g., GigabitEthernet0/0/1) can be used. ✅

❌ Incorrect Option:

MAC address is not needed because routers forward packets based on IP, not MAC addresses.

✅ Reference: HCIA-Datacom Routing Guide – Static Routing Fundamentals

Comprehensive Explanation: To prevent unauthorized changes to the router ' s configuration, the administrator can take several steps. Configuring an ACL to restrict management access ensures that only authorized users, such as the administrator, can log in to the router. Additionally, using AAA (Authentication, Authorization, and Accounting) allows the administrator to manage user permissions and control access to the router ' s functions based on user roles. Port-security is used for limiting MAC addresses on switch ports, and login privilege levels should be set appropriately but not limited to level 0, which restricts almost all actions.

In RSTP (Rapid Spanning Tree Protocol), the Backup port serves as a backup for the Designated port on the same bridge segment, not the root port. If the root port fails, the alternate port, not the backup port, takes over to maintain connectivity to the root bridge. The backup port does not have the capability to replace the root port​.