Trunk Interface Basics:

Trunk interfaces are used to carry traffic for multiple VLANs between switches.

Tagged frames include VLAN identifiers, while untagged frames belong to the native VLAN.

Untagged Frames:

Frames from the native VLAN are sent untagged on the trunk interface.

Conclusion:

Trunk interfaces support both tagged and untagged frames, so the statement is TRUE.

Comprehensive and Detailed Explanation:

In OSPF, routers on a broadcast network elect a DR and BDR to reduce overhead.

The multicast address 224.0.0.6 is used exclusively by the DR and BDR to receive LSU packets.

Other routers send LSU packets to 224.0.0.6, and the DR forwards them to 224.0.0.5 (all OSPF routers).

✅ Reference: HCIA-Datacom Routing Guide – OSPF DR/BDR Operations

Detailed Explanation:All listed options are valid OSPF (Open Shortest Path First) packet types:

HELLO packets establish and maintain neighbor relationships.

LSR (Link State Request) packets are used to request missing link-state information.

LSU (Link State Update) packets contain link-state advertisements for OSPF routers.

LSA (Link State Advertisement) packets carry route information.(Reference: HCIA-Datacom Training Material, OSPF Packet Types)

SNMP (Simple Network Management Protocol) supports the use of traps, which are unsolicited messages sent to the SNMP manager when specific events occur. Traps enable devices to report faults or important events as they happen, facilitating proactive fault management and quicker response times by network administrators​.

Comprehensive Explanation: Fit APs (Access Points) are designed to work in conjunction with an Access Controller (AC). They rely on the AC for configuration, management, and control of their wireless services. Without an AC, a Fit AP cannot function independently or provide wireless services. This is in contrast to Fat APs, which have their own management capabilities and can operate independently.

Detailed Explanation:The default Router Dead Interval in OSPF is 40 seconds for broadcast and point-to-point networks. This interval defines the time period a router waits to receive hello packets before declaring a neighbor as down. (Reference: HCIA-Datacom Training Material, OSPF Hello and Dead Intervals)

Detailed Explanation:The default preference of static routes on Huawei routers is 0. This means that if a static route is present, it will always take precedence over routes with higher preferences, such as dynamically learned routes, unless a lower preference is manually assigned​​.

Comprehensive and Detailed Explanation:

Huawei devices support the following Telnet authentication methods:

No authentication → Users can log in without a password. ✅

Password authentication → Requires a static password for access. ✅

AAA local authentication → Uses a centralized database for user authentication. ✅

❌ Incorrect Option:

MD5 authentication is NOT used in Telnet. SSH uses MD5 for key exchange, not Telnet.

✅ Reference: HCIA-Datacom Security Guide – Telnet & SSH Authentication

Detailed Explanation:RSTP (Rapid Spanning Tree Protocol) combines the Blocking, Listening, and Disabled states into Discarding, reducing the number of states to Discarding, Learning, and Forwarding. RSTP does not use a separate Listening state, as in standard STP. (Reference: HCIA-Datacom Training Material, RSTP Port States)

Comprehensive and Detailed In-Depth Explanation:

802.11n (Wi-Fi 4) supports both 2.4 GHz & 5 GHz.

802.11ax (Wi-Fi 6) also supports both 2.4 GHz & 5 GHz.

Incorrect Options:

802.11ac → Only supports 5 GHz.

802.11g → Only supports 2.4 GHz.