State transition testing is a black-box testing technique used to analyze the behavior of a system by examining the transitions between different states in response to events. In state transition testing, a state table or diagram is used to represent the states of a system and the transitions between these states triggered by events.

Option D is correct because in state transition testing, all transitions between states should be explicitly shown in the state table. This includes valid transitions that the system is expected to make under normal operation and, where relevant, invalid transitions that should be tested to ensure the system handles unexpected or erroneous inputs gracefully. The state table provides a comprehensive view of how the system should behave, making it possible to create tests that cover all defined transitions.

A defect is a flaw in a component or system that can cause the component or system to fail to perform its required function. A defect can cause harm to the end customer, the company, or both, depending on the impact and severity of the failure. In this case, the defect in the code causes the system to lock down accounts that have an overdraft higher than $1000, instead of $10,000. This can cause harm to the end customer, as they may lose access to their funds and face inconvenience or financial difficulties. This can also cause harm to the company, as they may lose customer trust and satisfaction, face legal issues or complaints, or incur additional costs for fixing the defect and restoring the accounts. Verified References: [A Study Guide to the ISTQB® Foundation Level 2018 Syllabus - Springer], Chapter 1, page 3-4.

Non-functional testing includes testing of both technical and non-technical quality characteristics. Non-functional testing is the process of testing the quality attributes of a system, such as performance, usability, security, reliability, etc. Non-functional testing can be applied at any test level and can use both black-box and white-box test techniques. Non-functional testing can cover both technical aspects, such as response time, throughput, resource consumption, etc., and non-technical aspects, such as user satisfaction, accessibility, compliance, etc. Therefore, option B is the correct answer.

Component integration tests are designed to verify the interactions and interfaces between integrated components. These tests should be carried out after component testing (where individual components are tested in isolation) but before system testing (where the entire system is tested as a whole). This ensures that any issues arising from the integration of components are identified and resolved early in the testing process, making option D the correct answer​​.

In Agile teams using the planning poker technique for estimating user stories, it is common practice to have further discussions and rounds of estimation if there is a significant discrepancy in the initial estimates. This helps in reaching a consensus and ensures that all team members understand the complexity and requirements of the user story. According to the ISTQB CTFL syllabus, planning poker involves discussions to clarify differences in estimates, especially when there is a wide range of values selected. By having Memb6 and Memb4, who provided the most pessimistic and optimistic estimates, explain their reasoning, it fosters a deeper understanding and encourages the team to converge towards a more accurate and agreed-upon estimate.

This answer is correct because test implementation is the activity where test work products, such as test cases, test data, test scripts, test harnesses, test stubs, or virtual services, are created and verified. Test implementation also involves setting up the test environment and preparing the test execution schedule. A virtual service emulating a real third-party service and the automated test scripts that interact with that service are examples of test work products that are typically created during test implementation.  References : ISTQB Glossary of Testing Terms v4.0, ISTQB Foundation Level Syllabus v4.0, Section 2.2.2.3

This answer is correct because configuration management is a process of establishing and maintaining consistency of a product’s performance, functional, and physical attributes with its requirements, design, and operational information throughout its life. Configuration management helps ensure that all relevant project documentation and software items are uniquely identified in all their versions and therefore can be unambiguously referenced in test documentation. This supports testing by providing traceability, consistency, and control over the test artifacts and the software under test.  References : : ISTQB Glossary of Testing Terms v4.0, : ISTQB Foundation Level Syllabus v4.0, Section 2.2.2.2

The statement that refers to good testing practice to be applied regardless of the chosen software development model is option D, which says that involvement of testers in work product reviews should occur as early as possible to take advantage of the early testing principle. Work product reviews are static testing techniques, in which the work products of the software development process, such as the requirements, the design, the code, the test cases, etc., are examined by one or more reviewers, with or without the author, to identify defects, violations, or improvements. Involvement of testers in work product reviews can provide various benefits for the testing process, such as improving the test quality, the test efficiency, and the test communication. The early testing principle states that testing activities should start as early as possible in the software development lifecycle, and should be performed iteratively and continuously throughout the lifecycle. Applying the early testing principle can help to prevent, detect, and remove defects at an early stage, when they are easier, cheaper, and faster to fix, as well as to reduce the risk, the cost, and the time of the testing process. The other options are not good testing practices to be applied regardless of the chosen software development model, but rather specific testing practices that may or may not be applicable or beneficial for testing, depending on the context and the objectives of the testing activities, such as:

Tests should be written in executable format before the code is written and should act as executable specifications that drive coding: This is a specific testing practice that is associated with test-driven development, which is an approach to software development and testing, in which the developers write automated unit tests before writing the source code, and then refactor the code until the tests pass. Test-driven development can help to improve the quality, the design, and the maintainability of the code, as well as to provide fast feedback and guidance for the developers. However, test-driven development is not a good testing practice to be applied regardless of the chosen software development model, as it may not be feasible, suitable, or effective for testing in some contexts or situations, such as when the requirements are unclear, unstable, or complex, when the test automation tools or skills are not available or adequate, when the testing objectives or levels are not aligned with the unit testing, etc.

Test levels should be defined such that the exit criteria of one level are part of the entry criteria for the next level: This is a specific testing practice that is associated with sequential software development models, such as the waterfall model, the V-model, or the W-model, in which the software development and testing activities are performed in a linear and sequential order, with well-defined phases, deliverables, and dependencies. Test levels are the stages of testing that correspond to the levels of integration of the software system, such as component testing, integration testing, system testing, and acceptance testing. Test levels should have clear and measurable entry criteria and exit criteria, which are the conditions that must be met before starting or finishing a test level. In sequential software development models, the exit criteria of one test level are usually part of the entry criteria for the next test level, to ensure that the software system is ready and stable for the next level of testing. However, this is not a good testing practice to be applied regardless of the chosen software development model, as it may not be relevant, flexible, or efficient for testing in some contexts or situations, such as when the software development and testing activities are performed in an iterative and incremental order, with frequent changes, feedback, and adaptations, as in agile software development models, such as Scrum, Kanban, or XP, when the test levels are not clearly defined or distinguished, or when the test levels are performed in parallel or concurrently, etc.

Test objectives should be the same for all test levels, although the number of tests designed at various levels can vary significantly: This is a specific testing practice that is associated with uniform software development models, such as the spiral model, the incremental model, or the prototyping model, in which the software development and testing activities are performed in a cyclical and repetitive manner, with similar phases, deliverables, and processes. Test objectives are the goals or the purposes of testing, which can vary depending on the test level, the test type, the test technique, the test environment, the test stakeholder, etc. Test objectives can be defined in terms of the test basis, the test coverage, the test quality, the test risk, the test cost, the test time, etc. Test objectives should be specific, measurable, achievable, relevant, and time-bound, and they should be aligned with the project objectives and the quality characteristics. In uniform software development models, the test objectives may be the same for all test levels, as the testing process is repeated for each cycle or iteration, with similar focus, scope, and perspective of testing. However, this is not a good testing practice to be applied regardless of the chosen software development model, as it may not be appropriate, realistic, or effective for testing in some contexts or situations, such as when the software development and testing activities are performed in a hierarchical and modular manner, with different phases, deliverables, and dependencies, as in sequential software development models, such as the waterfall model, the V-model, or the W-model, when the test objectives vary according to the test levels, such as component testing, integration testing, system testing, and acceptance testing, or when the test objectives change according to the feedback, the learning, or the adaptation of the testing process, as in agile software development models, such as Scrum, Kanban, or XP, etc. References : ISTQB Certified Tester Foundation Level (CTFL) v4.0 sources and documents:

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 1.1.1, Testing and the Software Development Lifecycle 1

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 1.2.1, Testing Principles 1

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 1.2.2, Testing Policies, Strategies, and Test Approaches 1

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 1.3.1, Testing in Software Development Lifecycles 1

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 2.1.1, Test Planning 1

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 2.1.2, Test Monitoring and Control 1

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 2.1.3, Test Analysis and De sign 1

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 2.1.4, Test Implementation 1

ISTQB® Certified Tester Foundation Level Syllabus v4.0, C hapter 2.1.5, Test Execution 1

ISTQB® Certified Tester Foundation Level Syllabu s v4.0, Chapter 2.1.6, Test Closure 1

ISTQB® Glossary of Testing Terms v4.0, Wo rk Product Review, Static Testing, Early Testing, Test-driven Development, Test Level, Entry Criterion, Exit Criterion, Test Objective, Test Basis, Test Coverage, Test Quality, Test Risk, Test Cost, Test Time 2

An incident is any event that occurs during testing that requires investigation. An incident management tool is a software tool that supports recording and tracking incidents throughout their life cycle. A QA manager of a start-up company needs to implement within a week a low cost incident management tool. The best option for this case is to manage the incidents in a spreadsheet posted on the intranet. This option has several advantages over other options:

It is low cost, as it does not require purchasing any additional software or hardware.

It is easy to implement within a week, as it does not require installing or configuring any complex software or hardware.

It is accessible and transparent, as it can be viewed and updated by anyone who has access to the intranet.

It is structured and organized, as it can store and display various information about incidents, such as identifier, summary, description, severity, priority, status, resolution, etc. The other options are not suitable for this case, as they have several disadvantages over the chosen option:

Documenting incidents on a large board in the lab is not a good option, as it is not accessible or transparent to anyone who is not physically present in the lab. It is also not structured or organized, as it may not store or display all the necessary information about incidents.

Purchasing and deploying an incident management tool is not a good option, as it is not low cost or easy to implement within a week. It may require spending a significant amount of money and time on acquiring, installing and configuring the software or hardware.

Managing the incidents through emails and phone calls is not a good option, as it is not structured or organized. It may lead to confusion, inconsistency or loss of information about incidents. Verified References:  A Study Guide to the ISTQB® Foundation Level 2018 Syllabus - Springer , Chapter 3, page 32-33.

According to the ISTQB CTFL syllabus, a defect is a deviation from the expected result which in this scenario is the incorrect discount applied to the customers. The root cause, as per the ISTQB definition, is the originating cause of a defect, which in this case is the incorrect requirement stating 50% instead of 5%. Therefore, the incorrect requirement is the root cause and the customer receiving the wrong discount is the effect of this root cause.