Cisco Unified Contact Center Express does not support an embedded Internet browser within the Cisco Agent Desktop. The Cisco Agent Desktop is a legacy desktop application that provides call control and agent state management for Unified CCX agents. The Cisco Agent Desktop does not have an embedded Internet browser, but it can launch an external browser to display web pages or applications. However, the Cisco Agent Desktop is deprecated and replaced by the Cisco Finesse desktop, which is a web-based agent and supervisor desktop that supports an embedded Internet browser. The CiscoFinesse desktop is available for all Unified CCX platform sets, including Standard, Enhanced, and Premium. For more information on the differences between the Cisco Agent Desktop and the Cisco Finesse desktop, see the Cisco Unified Contact Center Express Solution Reference Network Design, Release 12.5 (1), Chapter: Cisco Unified CCX Desktop Options, Section: Cisco Agent Desktop and Cisco Finesse Desktop Comparison. References:

• Cisco Unified Contact Center Express Solution Reference Network Design, Release 12.5 (1)
• Cisco 500-052 Free Practice Exam & Test Training - ITExams.com

The correct answer is B. A variable in the Application Editor that is defined as a parameter means that the value for that variable can be supplied via Application Configuration in Application Administration. This allows the administrator to change the value of the variable without modifying the script. For example, a parameter variable can be used to store the CSQ name, the prompt file name, the holiday schedule, or any other value that might change over time or across applications1.

The other options are not correct because:

• A. The variable can be used to pass data to and from subflows. This is not related to the parameter property of the variable. Any variable can be used to pass data to and from subflows, as long as it is in the scope of the subflow. A subflow is a script that is invoked by another script, and it can have its own parameters that are mapped to the variables of the calling script2.
• C. The value for that variable is defined by the calling application. This is not related to the parameter property of the variable. Any variable can be defined by the calling application, as long as it is passed as an argument to the called application. An application can be called by another application using the Call Subflow step or the Trigger Application step3.
• D. The variable can be used in conditional steps. This is not related to the parameter property of the variable. Any variable can be used in conditional steps, as long as it has a valid data type and value. A conditional step is a step that evaluates an expression and executes one of the branches based on the result.
• E. The variable can be used to pass data to and from VoiceXML applications. This is not related to the parameter property of the variable. Any variable can be used to pass data to and from VoiceXML applications, as long as it is mapped to the VoiceXML session variables. A VoiceXML application is an application that uses VoiceXML documents to provide interactive voice response services.

References: 1: Cisco Unified Contact Center Express Editor Step Reference Guide, Release 12.5(1) - Chapter 1: General Steps [Cisco Unified Contact Center Express] - Cisco 2: Cisco Unified Contact Center Express Editor Step Reference Guide, Release 12.5(1) - Chapter 1: General Steps [Cisco Unified Contact Center Express] - Cisco 3: Cisco Unified Contact Center Express Editor Step Reference Guide, Release 12.5(1) - Chapter 1: General Steps [Cisco Unified Contact Center Express] - Cisco : [Cisco Unified Contact Center Express Editor Step Reference Guide, Release 12.5(1) - Chapter 1: General Steps [Cisco Unified Contact Center Express] - Cisco] : [Cisco Unified Contact Center Express Editor Step Reference Guide, Release 12.5(1) - Chapter 6: VoiceXML Steps [Cisco Unified Contact Center Express] - Cisco]

The Database subsystem enables the Unified CCX applications to obtain information from data sources, which are databases configured to communicate with the Unified CCX system. You can connect the Unified CCX system with enterprise databases such as Microsoft SQL Server, Sybase, Oracle, or IBM DB2. The Database subsystem is available if your system has a license installed for either the Unified IP IVR or Unified CCX Premium product packages. If you are not using Unified CCX applications that require access to databases, you do not need to provision the Database subsystem. References: Cisco Unified Contact Center Express Administration Guide, Release 11.5 (1) - Provision of Additional Subsystems

To enable a contact center supervisor to access and monitor live data reports for multiple teams, the administrator should assign the supervisor as primary supervisor for one of the teams and as secondary supervisor for other relevant teams. This way, the supervisor can view the live data reports for all the teams that he or she is associated with, either as primary or secondary supervisor. The supervisor can also switch between different teams in the Cisco Finesse desktop or the Cisco Unified Intelligence Center (CUIC) web interface. For more information on how to assign primary and secondary supervisors for teams, see the Cisco Unified Contact Center Express Administration and Operations Guide, Release 12.5 (1), Chapter: Unified CCX Application Configuration, Section: Teams.

The following actions will not enable a contact center supervisor to access and monitor live data reports for multiple teams:

• Take no action, because a supervisor cannot monitor more than one team: This is incorrect, because a supervisor can monitor more than one team if he or she is assigned as primary or secondary supervisor for those teams. Taking no action will prevent the supervisor from accessing and monitoring live data reports for any team.
• Assign the supervisor as primary supervisor for all the relevant teams: This is not recommended, because a primary supervisor is responsible for managing and coaching the agents in a team, and having multiple primary supervisors for the same team can cause confusion and conflict. A team should have only one primary supervisor and optionally one or more secondary supervisors. A secondary supervisor can access and monitor live data reports for a team, but cannot perform other supervisory tasks, such as barge-in, intercept, or chat with agents.
• Add the supervisor as a member of all the relevant teams: This is not possible, because a supervisor cannot be a member of a team. A team consists of agents who handle customer contacts, and a supervisor who oversees the performance and activities of the agents. A supervisor can be associated with one or more teams, but cannot be part of a team. References:
• Cisco Unified Contact Center Express Administration and Operations Guide, Release 12.5 (1)
• [Deploying Cisco Unified Contact Center Express (UCCXD) v6.0]2, Module 1: Cisco Unified CCX Overview, Lesson 2: Cisco Unified CCX User Roles and Capabilities, Topic: Supervisor Role

 The three operations that can be performed within the Cisco Finesse IP Phone Agent (IPPA) are:

• A. A supervisor can use Finesse IPPA to act as an agent and accept calls. This is true because Finesse IPPA does not support supervisor tasks such as monitor, barge, and intercept, but supervisors can sign in and perform all agent tasks on their IP Phones. To perform supervisor tasks for Finesse IPPA agents, supervisors must sign in to the Finesse desktop and follow the same steps that they use for the Finesse desktop agents1.
• D. An agent using Finesse IPPA can enter Not Ready, Sign-out, and Wrap-up reasons. This is true because Finesse IPPA allows agents to change their state from Ready to Not Ready, sign out from the Finesse service, and apply wrap-up reasons after handling a call. Agents can select the appropriate reason codes from the list of available options on their IP Phones2.
• E. Agents can log in to Finesse IPPA with Cisco Unified CCX deployed using a Standard license. This is true because Finesse IPPA is supported on all Cisco Unified CCX license packages, including Standard, Enhanced, and Premium. Agents can use Finesse IPPA regardless of the license package that is deployed on Cisco Unified CCX3.

The other options are not correct because:

• B. An agent can sign in to Finesse IPPA and initiate call recording. This is false because Finesse IPPA does not support call recording. Agents cannot initiate, stop, or pause call recording from their IP Phones. Call recording is only supported on the Finesse desktop in the browser4.
• C. A supervisor can sign in to Finesse IPPA and initiate call recording. This is false because Finesse IPPA does not support call recording. Supervisors cannot initiate, stop, or pause call recording from their IP Phones. Call recording is only supported on the Finesse desktop in the browser4.

References: 1: Cisco Finesse Agent and Supervisor Desktop User Guide for Cisco Unified Contact Center Express, Release 12.5(1) - IP Phone Agent [Cisco Finesse] - Cisco 2: Cisco Finesse Agent and Supervisor Desktop User Guide for Cisco Unified Contact Center Express, Release12.5(1) - IP Phone Agent [Cisco Finesse] - Cisco 3: Cisco Unified Contact Center Express Solution Reference Network Design, Release 12.5(1) - Unified CCX Deployment Models [Cisco Unified Contact Center Express] - Cisco 4: Cisco Finesse Agent and Supervisor Desktop User Guide for Cisco Unified Contact Center Express, Release 12.5(1) - IP Phone Agent [Cisco Finesse] - Cisco

Reactive debugging is a facility provided by the Cisco Unified CCX Editor that allows you to debug a Cisco Unified CCX script live with a real voice call. Reactive debugging enables you to step through the script execution and view the variable values and the call flow in real time. You can also set breakpoints and watchpoints to pause the script execution and inspect the variables. Reactive debugging is useful for troubleshooting and testing the script logic and functionality12

References: 1: Deploying Cisco Unified Contact Center Express (UCCXD) v6.0 - Course 644-906 1 2: Cisco Unified Contact Center Express Scripting and Development Series: Volume 2, Editor Step Reference, Release 10.0(1) - Debugging Scripts [Cisco Unified Contact Center Express] - Cisco 

The Control Center on Cisco Unified Contact Center Express Serviceability is the tool that allows you to start, stop, and restart Cisco Unified Contact Center Express services. The Control Center provides a web-based interface to manage the Unified CCX components and subsystems, such as Cisco Unified CM Telephony, Cisco Unified CM Administration, Cisco Unified CCX Engine, Cisco Unified CCX Administration, and so on. You can accessthe Control Center from the Tools menu on the Cisco Unified CCX Serviceability page. From the Control Center, you can perform the following tasks:

• View the status of each service on each node in the cluster.
• Start or stop a service on a specific node or on all nodes in the cluster.
• Restart a service on a specific node or on all nodes in the cluster.
• Activate or deactivate a service on a specific node or on all nodes in the cluster.
• Enable or disable the automatic startup of a service on a specific node or on all nodes in the cluster.
• View the dependencies and dependents of each service.
• View the logs and traces of each service1, pages 2-1 to 2-8. References: Cisco Unified Contact Center Express Serviceability Guide, Release 12.0 (1)