Which four settings can a Citrix Architect use to create a configuration job using Citrix Application Delivery Management? (Choose four.)

Scenario: Based on a discussion between a Citrix Architect and a team of Workspacelab members, the MPX Logical layout for Workspacelab has been created across three (3) sites.

They captured the following requirements during the design discussion held for a Citrix ADC design project:

All three (3) Workspacelab sites (DC, NDR, and DR) will have similar Citrix ADC configurations and design.

Both external and internal Citrix ADC MPX appliances will have Global Server Load Balancing (GSLB) configured and deployed in Active/Passive mode.

GSLB should resolve both A and AAA DNS queries.

In the GSLB deployment, the NDR site will act as backup for the DC site, whereas the DR site will act as backup for the NDR site.

When the external Citrix ADC replies to DNS traffic coming in through Cisco Firepower IPS, the replies should be sent back through the same path.

On the internal Citrix ADC, both the front-end VIP and backend SNIP will be part of the same subnet.

The external Citrix ADC will act as default gateway for the backend servers.

All three (3) sites, DC, NDR, and DR, will have two (2) links to the Internet from different service providers configured in Active/Standby mode.

Which design decision must the architect make the design requirements above?

Which three methods can a Citrix Architect use to assess the capabilities of a network infrastructure? (Choose three.)

A Citrix Architect can execute a configuration job using a DeployMasterConfiguration template on a NetScaler_________deployed_________. (Choose the correct option to complete sentence.)

Scenario: A Citrix Architect is asked by management at the Workslab organization to review their existing configuration and make the necessary upgrades. The architect recommends small changes to the pre-existing NetScaler configuration. Currently, the NetScaler MPX devices are configured in a high availability pair, and the outbound traffic is load-balanced between two Internet service providers 9ISPs). However, the failover is NOT happening correctly.

The following requirements were discussed during the design requirements phase:

The return traffic for a specific flow should be routed through the same path while using Link Load Balancing.

The link should fail over if the ISP router is up and intermediary devices to an ISP router are down.

Traffic going through one ISP router should fail over to the secondary ISP, and the traffic should NOT flow through both routers simultaneously.

What should the architect configure with Link Load balancing (LLB) to meet this requirement?

Scenario: Based on a discussion between a Citrix Architect and a team of Workspacelab members, the MPX Logical layout for Workspacelab has been created across three (3) sites.

They captured the following requirements during the design discussion held for a Citrix ADC design project:

All three (3) Workspacelab sites (DC, NDR, and DR) will have similar NetScaler configurations and design.

Both external and internal NetScaler MPX appliances will have Global Server Load Balancing (GSLB) configured and deployed in Active/Passive mode.

GSLB should resolve both A and AAA DNS queries.

In the GSLB deployment, the NDR site will act as backup for the DC site, whereas the DR site will act as backup for the NDR site.

When the external NetScaler replies to DNS traffic coming in through Cisco Firepower IPS, the replies should be sent back through the same path.

On the internal NetScaler, both the front-end VIP and backend SNIP will be part of the same subnet.

The external NetScaler will act as default gateway for the backend servers.

All three (3) sites, DC, NDR, and DR, will have two (2) links to the Internet from different service providers configured in Active/Standby mode.

Which design decision must the architect make the design requirements above?

Scenario: A Citrix Architect has deployed Citrix Gateway integration with the StoreFront server. The Vasco server is used to perform WebAUTH to authenticate users The configuration snippet is as follows:

Which parameter is utilized to calculate the content-length insert in the request sent to the server?

A Citrix Architect needs to evaluate and define the architecture and operational processes required to implement and maintain the production environment. In which two phases of the Citrix Methodology will the architect define this? (Choose two.)

Scenario: The Workspacelab team has implemented Citrix ADC high availability pair and Citrix ADC Management and Analytics System (Citrix Application Delivery Management). The Citrix Application Delivery Management was configured by a Citrix Architect to monitor and manage these devices. The Workspacelab team wants to load balance their Microsoft SharePoint servers on the Citrix ADC and needs the process to be streamlined and administered using Citrix Application Delivery Management.

The following requirements were discussed during the meeting:

The Microsoft SharePoint server should be optimized, load balanced, and secured in the network and should be deployed using Citrix Application Delivery Management.

All the configurations should be yenned before getting pushed to the Citrix Application Delivery Management.

Which feature should the architect use to configure the Microsoft SharePoint server using Citrix Application Delivery Management?

Scenario: A Citrix Architect has set up Citrix ADC MPX devices in high availability mode with version 12.0.53.13 nc. These are placed behind a Cisco ASA 5505 firewall. The Cisco ASA firewall is configured to block traffic using access control lists. The network address translation (NAT) is also performed on the firewall. The following requirements were captured by the architect during the discussion held as part of the Citrix ADC security implementation project with the customer ' s security team: The Citrix ADC MPX device:

• should monitor the rate of traffic either on a specific virtual entity or on the device. It should be able to mitigate the attacks from a hostile client sending a flood of requests. The Citrix ADC device should be able to stop the HTTP, TOP, and DNS based requests.

• needs to protect backend servers from overloading.

• needs to queue all the incoming requests on the virtual server level instead of the service level.

• should provide access to resources on the basis of priority.

• should provide protection against well-known Windows exploits, virus-infected personal computers, centrally managed automated botnets. compromised webservers, known spammersThackers. and phishing proxies.

• should provide flexibility to enforce the desired level of security check inspections for the requests originating from a specific geolocation database.

• should block the traffic based on a predetermined header length, URL length, and cookie length.The device should ensure that characters such as a single straight quote ( ' ) backslash (): and semicolon (;) are either blocked, transformed, or dropped while being sent to the backend server.

Which security feature should the architect implement to meet these requirements?