Scenario: Based on a discussion between a Citrix Architect and a team of Workspacelab members, the MPX Logical layout for Workspacelab has been created across three (3) sites.

They captured the following requirements during the design discussion held for a Citrix ADC design project:

All three (3) Workspacelab sites (DC NDR and DR) will have similar Citrix ADC configurations and design

Both external and internal Citrix ADC MPX appliances will have Global Server Load Balancing (GSLB) configured and deployed in Active/Passive mode

GSLB should resolve both A and AAA DNS queries.

In the GSLB deployment the NDR site will act as backup for the DC site, whereas the DR site will act as backup for the NDR site

When the external Citrix ADC replies to DNS traffic coming in through Cisco Firepower IPS the replies should be sent back through the same path

On the internal Citrix ADC. both front-end VIP and back-end SNIP will be part of the same subnet

USIP is configured on the DMZ Citrix ADC appliances

The external Citrix ADC will act as default gateway for back-end servers.

All three (3) sites (DC, NDR, and DR) will have two (2) links to the Internet from different service providers configured in Active/Standby mode

Which design decision must the architect make to meet the design requirements above?

Scenario: A Citrix Architect has deployed two MPX devices. 12.0.53.13 nc and MPX 11500 models, in a high availability (HA) pair for the Workspace labs team. The deployment method is two-arm and the devices are installed behind a CISCO ASA 5585 Firewall. The architect enabled the following features on the Citrix ADC devices. Content Switching. SSL Offloading, Load Balancing, Citrix Gateway. Application Firewall in hybrid security and Appflow. All are enabled to send monitoring information to Citrix Application Delivery Management 12.0.53.13 nc build. The architect is preparing to configure load balancing for Microsoft Exchange 2016 server.

The following requirements were discussed during the implementation:

All traffic needs to be segregated based on applications, and the fewest number of IP addresses should be utilized during the configuration.

All traffic should be secured and any traffic coming Into FITTP should be redirected to HTTPS.

Single Sign-on should be created for Microsoft Outlook web access (OWA).

Citrix ADC should recognize Uniform Resource Identifier (URI) and close the session to Citrix ADC when users hit the Logoff button In Microsoft Outlook web access.

Users should be able to authenticate using either user principal name (UPN) or sAMAccountName.

The Layer 7 monitor should be configured to monitor the Microsoft Outlook web access servers and the monitor probes must be sent on SSL.

Which monitor will meet these requirements?

Scenario: Based on a discussion between a Citrix Architect and a team of Workspacelab members, the MPX Logical layout for Workspacelab has been created across three (3) sites.

The requirements captured during the design discussion held for a NetScaler design project are as follows:

Two (2) pairs of Citrix ADC MPX appliances deployed in the DMZ and internal network.

High Availability will be accessible for each Citrix ADC MPX

The external Citrix ADC MPX appliance will be deployed in multi-arm mode.

The internal Citrix ADC MPX will be deployed in single-arm mode wherein it will be connected to Cisco ACI Fabric.

All three (3) Workspacelab sites: Dc, NDR and DR, will have similar Citrix ADC configurations and design.

How many Citrix ADC MPX appliances should the architect deploy at each site to meet the design requirements above?

Scenario: A Citrix Architect has met with a team of Workspacelab members for a design discussion. They have captured the following requirements for the Citrix ADC design project:

• The Citrix Gateway virtual server is integrated with the Citrix Virtual Apps and Desktops environment.

• The authentication must be deployed for the users from the workspacelab.com and vendorlab.com domains.

• The workspacelab users connecting from the internal (workspacelab) network should be authenticated using LDAP.

• The workspacelab users connecting from the external network should be authenticated using LDAP and RADIUS

• The vendorlab users should be authenticated using Active Directory Federation Service.

• The user credentials must NOT be shared between workspacelab and vendor) ab.

• Single Sign-on must be performed between F and Citrix Gateway.

• A domain drop down list must be provided if the user connects to the Citrix Gateway virtual server externally.

• The domain of the user connecting externally must be identified using the domain selected from the domain drop down.

At which bind point should the architect bind the domain drop-down schema policy?

Scenario: A Citrix Architect needs to design a NetScaler deployment in Microsoft Azure. An Active-Passive NetScaler VPX pair will provide load balancing for three distinct web applications. The architect has identified the following requirements:

Minimize deployment costs where possible.

Provide dedicated bandwidth for each web application.

Provide a different public IP address for each web application.

For this deployment, the architect should configure each NetScaler VPX machine to have ______ network interface(s) and configure IP address by using ________. (Choose the correct option to complete the sentence).

Scenario: A Citrix Architect needs to design a new Citrix ADC Gateway deployment to provide secure RDP access to backend Windows machines.

Click the Exhibit button to view additional requirements collected by the architect during the design discussions.

To meet the customer requirements, the architect should deploy the RDP proxy through _______, using a _________ solution. (Choose the correct option to complete the sentence.)

Which StyleBook group should a Citrix Architect use to deploy the configuration for Microsoft SharePoint servers on Citrix ADC Management and Analytics (Citrix Application Delivery Management)?

Scenario: A Citrix Engineer is asked by management at the workspacelab organization to review their existing Citrix ADC Configurations and make the necessary upgrades. The architect recommends small changes to the pre-existing Citrix ADC configuration. Currently, the Citrix ADC MPX devices are configured in high-availability pair, and the outbound traffic is load balanced between two internet service providers (ISPs), however, the failover is NOT happening correctly. The following requirements were discussed during the design requirement phase:

The return traffic for a specific flow should be routed through the same path while using Link Load Balancing.

The link should fail over even if the ISP router is up and intermediary devices to an ISP router are down.

Traffic going through one ISP router should fail over to the secondary ISP, and the traffic should not flow through both routers simultaneously.

What should the architect configure with Link Load Balancing LLB) to meet the requirement?

Which encoding type can a Citrix Architect use to encode the StyleBook content, when importing the StyleBook configuration under source attribute?

Scenario: A Citrix Architect needs to design a new NetScaler Gateway deployment to provide secure RDP access to backend Windows machines.

Click the Exhibit button to view additional requirements collected by the architect during the design discussions.

To meet the customer requirements, the architect should deploy the RDP proxy through ______ using a________ solution. (Choose the correct option to complete the sentence.)