Ticking Clock Black Friday Special: 75% Off! Apply coupon code below to save on all exam bundles! - Ends in 0d 00h 00m 00s - Coupon code: 75epass

Exact2Pass Menu

Operations Management

Last Update 1 hour ago Total Questions : 120

The Operations Management content is now fully updated, with all current exam questions added 1 hour ago. Deciding to include L5M9 practice exam questions in your study plan goes far beyond basic test preparation.

You'll find that our L5M9 exam questions frequently feature detailed scenarios and practical problem-solving exercises that directly mirror industry challenges. Engaging with these L5M9 sample sets allows you to effectively manage your time and pace yourself, giving you the ability to finish any Operations Management practice test comfortably within the allotted time.

Question # 1

In order to keep processing costs down, which of the following should a company opt for in terms of operating processes?

A.

low volume, high variety

B.

high volume, low variety

C.

high variation, low visibility

D.

low variation, high visibility

Question # 2

There are four manufacturing companies located on Seashell Industrial Estate. Each company creates a different product and employs a different maintenance approach to its operations. For each company, select the corresponding maintenance approach and the key operating process characteristic.

Company 1: This company creates craft beer and offers customers a tour of the brewery for a small charge. The brewing equipment is serviced monthly and the brewery is kept extremely clean. All equipment is labelled with the last service date.

Company 2: This company produces seasonal items such as Easter Eggs and Christmas Cake. The equipment has a control panel where lights will flash red advising staff to check oil levels and components. Staff can then report issues to the maintenance team if remedial work is required. Product demand fluctuates throughout the year.

Company 3: This equipment does not often break down and is only fixed when it is reported by staff as no longer working. Company 3 creates toys, providing a large range of product sizes and colours based on different customer requirements.

Company 4: Parts of the machine are serviced quarterly but in general, the machine is left to run its course and is then replaced when it is no longer financially viable to fix. The company produces cereal and the operating process is focused on the quantity produced and therefore uses standardised processes.

Complete the table below by listing the maintenance approach and operating process characteristic for each company. Each response should only be used once: preventive maintenance, run to breakdown maintenance, condition-based maintenance, mixed maintenance, volume, visibility, variation, variety

Company

Maintenance approach

Operating-process characteristic

Company 1

Box 1

Box 5

Company 2

Box 2

Box 6

Company 3

Box 3

Box 7

Company 4

Box 4

Box 8

Which of the following will you put into box 1?

A.

preventive maintenance

B.

run-to-breakdown maintenance

C.

condition-based maintenance

D.

mixed maintenance

Question # 3

Which of the following items created by an organisation are intangible? Select TWO

A.

Legal Advice provided by a solicitor

B.

A cup of coffee from a restaurant

C.

A massage given at a Spa

D.

A shirt bought at a retail outlet

Question # 4

Which of the following are performance objectives which can be applied to the Operations department at any organisation? Select THREE

A.

cost reduction

B.

dependability

C.

quality

D.

flexibility

E.

innovation

Question # 5

Which of the following stakeholders are also internal customers?

A.

buyers

B.

the local community

C.

banks and lending agencies

D.

employees

Question # 6

Which of the following would most directly demonstrate the success of an organisation's order-winning objectives in a retail environment?

A.

increased costs

B.

streamlined operations procedures

C.

improved supplier relations

D.

customer loyalty

Question # 7

Below are details of 4 local manufacturing companies. For each company you must decide what the main objective is for the organisation and what layout their manufacturing plant has.

Company 1: This company creates large, delicate products which are hard to move. The main aim of the company is to stand out from competitors due to the superior level of materials used and by using the latest forms of technology to create the items.

Company 2: This company produces 72 different items and has designated zones within its premises for the creation of each item. The zones are organised based on the technology used and some products may be passed between different zones to be completed. The company creates many different items in response to changing customer demands, with many product lines only lasting a single season.

Company 3: Company 3 creates one product which flows along a single production line, with staff members adding to the product on four different occasions. The company must produce a high volume of this singular product in order to break even. Therefore, there is always a steady flow of items through the plant and it is important there is no stoppage in production.

Company 4: This company produces small batches of products, as and when they are ordered by customers. Due to uncertainty in demand, a high profit margin is added to the cost of each item. Teams in the factory are grouped into different areas depending on the technological process they are using.

Complete the table below by listing the objective criteria and plant layout for each company. Each response should only be used once: flexibility, speed, quality, cost, functional layout, cell layout, product layout, fixed-position layout

Company

Performance objective

Plant layout

Company 1

Box 1

Box 5

Company 2

Box 2

Box 6

Company 3

Box 3

Box 7

Company 4

Box 4

Box 8

Which of the following will you put into box 7?

A.

functional layout

B.

cell layout

C.

product layout

D.

fixed-position layout

Question # 8

Tools by Tom is a manufacturer of hardware. They have recently advertised that a new range of hammers would be released shortly, however due to issues in the supply chain and a low-quality delivery of steel, the production of the new hammers has been put on hold. Of the following, which are internal impacts of failure for the company? Select TWO.

A.

loss of credibility

B.

customer complaints

C.

downtime

D.

wasted resources

E.

decreased market share

Question # 9

Below are details of 4 local manufacturing companies. For each company you must decide what the main objective is for the organisation and what layout their manufacturing plant has.

Company 1: This company creates large, delicate products which are hard to move. The main aim of the company is to stand out from competitors due to the superior level of materials used and by using the latest forms of technology to create the items.

Company 2: This company produces 72 different items and has designated zones within its premises for the creation of each item. The zones are organised based on the technology used and some products may be passed between different zones to be completed. The company creates many different items in response to changing customer demands, with many product lines only lasting a single season.

Company 3: Company 3 creates one product which flows along a single production line, with staff members adding to the product on four different occasions. The company must produce a high volume of this singular product in order to break even. Therefore, there is always a steady flow of items through the plant and it is important there is no stoppage in production.

Company 4: This company produces small batches of products, as and when they are ordered by customers. Due to uncertainty in demand, a high profit margin is added to the cost of each item. Teams in the factory are grouped into different areas depending on the technological process they are using.

Complete the table below by listing the objective criteria and plant layout for each company. Each response should only be used once: flexibility, speed, quality, cost, functional layout, cell layout, product layout, fixed-position layout

Company

Performance objective

Plant layout

Company 1

Box 1

Box 5

Company 2

Box 2

Box 6

Company 3

Box 3

Box 7

Company 4

Box 4

Box 8

Which of the following will you put into box 8?

A.

functional layout

B.

cell layout

C.

product layout

D.

fixed-position layout

Question # 10

What is the end purpose of introducing a Total Quality Management process to the operations department of an organisation?

A.

customer satisfaction

B.

reducing costs

C.

zero defects

D.

increasing market share

Go to page: