Summer Sale Special Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: buysanta

Exact2Pass Menu

Implementing Cisco Enterprise Advanced Routing and Services (300-410 ENARSI)

Last Update 11 hours ago Total Questions : 642

The Implementing Cisco Enterprise Advanced Routing and Services (300-410 ENARSI) content is now fully updated, with all current exam questions added 11 hours ago. Deciding to include 300-410 practice exam questions in your study plan goes far beyond basic test preparation.

You'll find that our 300-410 exam questions frequently feature detailed scenarios and practical problem-solving exercises that directly mirror industry challenges. Engaging with these 300-410 sample sets allows you to effectively manage your time and pace yourself, giving you the ability to finish any Implementing Cisco Enterprise Advanced Routing and Services (300-410 ENARSI) practice test comfortably within the allotted time.

Question # 166

What does the PE router convert the Ipv4 prefix to within an MPLS VPN?

A.

VPN-IPv4 prefix combined with the 64-bit route distinguisher

B.

48-bit route combining the IP and PE router-id

C.

prefix that combines the ASN, PE router-id, and IP prefix

D.

eBGP path association between the PE and CE sessions

Question # 167

Which feature drops packets if the source address is not found in the snooping table?

A.

IPv6 Source Guard

B.

IPv6 Destination Guard

C.

IPv6 Prefix Guard

D.

Binding Table Recovery

Question # 168

What are two characteristics of VRF instance? (Choose two.)

A.

All VRFs share customers routing and CEF tables .

B.

An interface must be associated to one VRF.

C.

Each VRF has a different set of routing and CEF tables

D.

It is defined by the VPN membership of a customer site attached to a P device.

E.

A customer site can be associated to different VRFs

Question # 169

What is the minimum time gap required by the local system before putting a BFD control packet on the wire?

A.

Detect Mult

B.

Required Min Echo RX Interval

C.

Desired Min TX Interval

D.

Required Min RX Interval

Question # 170

Refer to the exhibit.

The neighbor relationship is not coming up Which two configurations bring the adjacency up? (Choose two)

A.

NYrouter ospf 1area 0 authentication message-digest

B.

LAinterface E 0/0ip ospf message-digest-key 1 md5 Cisco123

C.

NYinterface E 0/0no ip ospf message-digest-key 1 md5 Cisco123ip ospf authentication-key Cisco123

D.

LAinterface E 0/0ip ospf authentication-key Cisco123

E.

LArouter ospf 1area 0 authentication message-digest

Question # 171

Refer to the exhibit.

Which interface configuration must be configured on the HUB router to enable MVPN with mGRE mode?

A.

Option A

B.

Option B

C.

Option C

D.

Option D

Question # 172

Refer to the exhibit.

A network administrator logs into the router using TACACS+ username and password credentials, but the administrator cannot run any privileged commands Which action resolves the issue?

A.

Configure TACACS+ synchronization with the Active Directory admin group

B.

Configure the username from a local database

C.

Configure full access for the username from TACACS+ server

D.

Configure an authorized IP address for this user to access this router

Question # 173

Refer to the exhibit. A network administrator configured an IPv6 access list to allow TCP return traffic only, but it is not working as expected. Which changes resolve this issue?

A.

ipv6 access-list inboundpermit tcp any any syndeny ipv6 any any log!interface gi0/0ipv6 traffic-filter inbound out

B.

ipv6 access-list inboundpermit tcp any any syndeny ipv6 any any log!interface gi0/0ipv6 traffic-filter inbound in

C.

ipv6 access-list inboundpermit tcp any any establisheddeny ipv6 any any log!interface gi0/0ipv6 traffic-filter inbound in

D.

ipv6 access-list inboundpermit tcp any any establisheddeny ipv6 any any log!interface gi0/0ipv6 traffic-filter inbound out

Question # 174

Refer to the exhibit. A network administrator redistributed the default static route into OSPF toward all internal routers to reach to Internet. Which set of commands restores reachability to the Internet by internal routers?

A.

router ospf 1default-information originate

B.

router ospf 1network 0.0.0.0 0.0.0.0 area 0

C.

router ospf 1redistribute connected 0.0.0.0

D.

router ospf 1redistribute static subnets

Question # 175

Exhibit:

Bangkok is using ECMP to reach to the 192.168.5.0/24 network. The administrator must configure Bangkok in such a way that Telnet traffic from 192.168.3.0/24 and192.168.4.0/24 networks uses the HongKong router as the preferred router. Which set of configurations accomplishes this task?

A.

access-list 101 permit tcp 192.168.3.0 0.0.0.255 192.168.5.0 0.0.0.255access-list 101 permit tcp 192.168.4.0 0.0.0.255 192.168.5.0 0.0.0.255!route-map PBR1 permit 10match ip address 101set ip next-hop 172.18.1.2interface Ethernet0/3ip policy route-map PBR1

B.

access-list 101 permit tcp 192.168.3.0 0.0.0.255 192.168.5.0 0.0.0.255 eq 23access-list 101 permit tcp 192.168.4.0 0.0.0.255 192.168.5.0 0.0.0.255 eq 23!route-map PBR1 permit 10match ip address 101set ip next-hop 172.18.1.2interface Ethernet0/1ip policy route-map PBR1

C.

access-list 101 permit tcp 192.168.3.0 0.0.0.255 192.168.5.0 0.0.0.255 eq 23access-list 101 permit tcp 192.168.4.0 0.0.0.255 192.168.5.0 0.0.0.255 eq 23!route-map PBR1 permit 10match ip address 101set ip next-hop 172.18.1.2!interface Ethernet0/3ip policy route-map PBR1

D.

access-list 101 permit tcp 192.168.3.0 0.0.0.255 192.168.5.0 0.0.0.255access-list 101 permit tcp 192.168.4.0 0.0.0.255 192.168.5.0 0.0.0.255!route-map PBR1 permit 10match ip address 101set ip next-hop 172.18.1.2!interface Ethernet0/1ip policy route-map PBR1

Question # 176

Refer to the exhibit.

The administrator can see the traps for the failed login attempts, but cannot see the traps of successful login attempts. What command is needed to resolve the issue?

A.

Configure logging history 2

B.

Configure logging history 3

C.

Configure logging history 4

D.

Configure logging history 5

Question # 177

Refer to the exhibits.

A user on the 192.168.1.0/24 network can successfully ping 192.168.3.1, but the administrator cannot ping 192.168.3.1 from the LA router. Which set of configurations fixes the issue?

A)

B)

C)

D)

A.

Option A

B.

Option B

C.

Option C

D.

Option D

Question # 178

Which method changes the forwarding decision that a router makes without first changing the routing table or influencing the IP data plane?

A.

nonbroadcast multiaccess

B.

packet switching

C.

policy-based routing

D.

forwarding information base

Question # 179

Refer to the exhibit.

Network operations cannot read or write any configuration on the device with this configuration from the operations subnet. Which two configurations fix the issue? (Choose two.)

A.

Configure SNMP rw permission in addition to community ciscotest.

B.

Modify access list 1 and allow operations subnet in the access list.

C.

Modify access list 1 and allow SNMP in the access list.

D.

Configure SNMP rw permission in addition to version 1.

E.

Configure SNMP rw permission in addition to community ciscotest 1.

Question # 180

Which protocol is used in a DMVPN network to map physical IP addresses to logical IP addresses?

A.

BGP

B.

LLDP

C.

EIGRP

D.

NHRP

Go to page: