300-425 Cisco Designing Cisco Enterprise Wireless Networks (ENWLSD) exact Exam Questions

Designing Cisco Enterprise Wireless Networks (ENWLSD)

Last Update 20 hours ago Total Questions : 286

The Designing Cisco Enterprise Wireless Networks (ENWLSD) content is now fully updated, with all current exam questions added 20 hours ago. Deciding to include 300-425 practice exam questions in your study plan goes far beyond basic test preparation.

You'll find that our 300-425 exam questions frequently feature detailed scenarios and practical problem-solving exercises that directly mirror industry challenges. Engaging with these 300-425 sample sets allows you to effectively manage your time and pace yourself, giving you the ability to finish any Designing Cisco Enterprise Wireless Networks (ENWLSD) practice test comfortably within the allotted time.

Question # 11

A hospital wireless environment was designed with these characteristics:

• RF coverage

• better than -67 dBm in the 5 GHz spectrum

• RRM be used for DCA and TPC in the 2.4 GHz band

• RRM be used for DCA and TPC in the 5 GHz band

After deployment, why do many of the legacy 802.11b/g devices have difficulty maintaining connectivity?

Excessive co-channel interference in the 2.4 GHz band exists.

Excessive overlapping channels in the 2.4 GHz band exists.

TPC drastically increases Tx power in the 2.4 GHz band.

TPC drastically reduces Tx power in the 2.4 GHz band.

Question # 12

A wireless consultant reviewing the installation of an old wireless network. The existing AireOS controllers are running software version 6.0.4539:44024. The customer is using OEAP and wants to keep this functionality. Which licenses should the consultant propose with the latest controller software version?

Base

Premium

WPlus

Advanced

Question # 13

WLC SSO is set up between two WLCs in a service provider network serving public spaces. On WLC failover, it is noticed that only about half of the original client count is now showing on the secondary WLC, although it is currently showing the role as active. Which design side case explains the issue?

The secondary WLC platform does not support the required client count.

The WLCs had not completed database sync before the primary failure.

SSO is not configured correctly.

Some client sessions were in WebAuth-Req state before failover.

Question # 14

A retail chain wants centralized WLAN control with remote APs. Which Cisco deployment

model is most suitable?

FlexConnect

Cloud-only deployment

Autonomous AP deployment

Mesh-only architecture

Question # 15

An enterprise network administrator is asked to set up an experimental WLAN for a collaboration project with a local service provider. The WLAN must be anchored to a WLC in the service provider data center using legacy mobility mode. After the configurations are completed on the WLCs and the firewalls in the path, the data path mobility tunnel is failing to come up. What should be performed by the administrator to debug the issue?

Establish a Telnet connection from a local PC to the firewall on port 97.

Use the mapping command on the WLC.

Establish a Telnet connection from a local PC to the firewall on port 16666.

Use the mapping command on the WLC.

Question # 16

Which statement about AP failover priority for access points when configured with priority 1 or 4 is true?

When configured with priority 1, the access point is assigned with the highest priority level and it is marked as critical. This access point fails over before other access points with the lower priority when there is primary controller failure.

When configured with priority 4, the access point is assigned with the highest priority level and it is marked as critical. This access point fails over before other access points with the lower priority when there is primary controller failure.

When configured with priority 4, the access point is assigned with the lowest priority level and it is marked as low. This access point fails over after other access points with the higher priority when there is primary controller failure.

When configured with priority 1, the access point is assigned with the medium priority level and it is marked as medium. This access point fails over after other access points with the higher priority when there is primary controller failure.

Question # 17

A customer designs a Cisco wireless environment to provide connectivity lo employees and guests The guest SSID must be configured on three anchor WLCs named Anchor 1, Anchor2, and Anchor3 in a DMZ. The guest anchor priority must be configured to ensure that Anchor 1 has the highest priority. Which priority level must be incorporated in the design for Anchor1?

Question # 18

An engineer is deploying new APs to serve IEEE 802.11g through 802 11ac clients and wants to use the Ekahau Site Survey tool to verify RF coverage Management wants the engineer to verity and create coverage maps as quickly as possible. Which configuration accomplishes the goal?

active mode with two wireless adapters

passive mode with two wireless adapters

passive mode with one wireless adapter

active mode with one wireless adapter