10.10.225.32 255.255.255.224. The scenario should be solved by matching the described behavior to the Cisco feature that actually performs it. Cisco CCNA 200-301 v1.1 includes this topic under Network Fundamentals, so the answer must be validated against normal Cisco device behavior and the operational wording of the scenario. The key is not simply recognizing a familiar acronym; it is identifying what the feature does, where it is configured, and what result it produces. The other options are real networking terms or plausible phrases, but they operate at a different layer, solve a different problem, or do not create the outcome described. In a real network, selecting the wrong option would either leave the feature nonfunctional, create a forwarding or security gap, or send troubleshooting in the wrong direction. The selected answer is the only one that matches the stated requirement and the way Cisco switching, routing, services, security, wireless, or automation functions are expected to operate. This is why the verified answer remains the best technical choice for the question.

The router replaces the original source and destination MAC addresses with the sending router MAC address as the source and neighbor MAC address as the destination. Cisco routers select forwarding paths by longest-prefix match first, then administrative distance and metric when comparable routes compete. Cisco CCNA 200-301 v1.1 includes this under IP Connectivity, where the exam expects engineers to recognize the device behavior that actually produces the required outcome. The question is best solved by reading the operational clue rather than choosing a familiar acronym. The wrong choices either do not match the destination, use the wrong next hop, or fail to provide the intended primary/backup behavior. In a production network, the wrong choice would normally create an outage, leave a management or security gap, or send troubleshooting toward the wrong subsystem. The selected answer is the one that matches the control-plane, data-plane, wireless, security, services, or automation mechanism described in the question. That is why it remains the verified answer for this item.

ip address 192.168.0.0 255.255.254.0. Eight floors with roughly 30 to 40 users each require an address block large enough for about 320 hosts, plus growth and reserved addresses. A /23 provides 512 total IPv4 addresses and 510 usable host addresses, which is far more efficient than a /16 while still large enough for the building. A /25 supports only 126 usable hosts, and a /27 supports only 30 usable hosts, which is too small for a floor with up to 40 users if each floor needs its own subnet. Cisco CCNA 200-301 v1.1 Network Fundamentals requires subnet sizing by usable host count, not by guessing at classful ranges. The subnet mask 255.255.254.0 corresponds to /23. It fits the stated requirement with reasonable efficiency and avoids the massive waste of 255.255.0.0. Therefore, the correct router SVI addressing choice is the /23 option.

Use A for this item. RFC 1918 private address space was defined to conserve public IPv4 addresses. Organizations can reuse private ranges internally and translate at the edge with NAT when Internet access is needed. In Cisco CCNA 200-301 v1.1, Network Fundamentals questions frequently test the practical boundary between similar features: what the feature does, where it is configured, and what problem it is meant to solve. It was not designed to preserve IPv6 space or eliminate overlap between private organizations. A clean way to validate the answer is to map the wording of the scenario to the actual device function. If the feature supplies addressing, forwarding, authentication, trunking, route selection, or controller communication, the answer must match that function exactly rather than a nearby protocol name.

switch(config)#IIdp port-description. The scenario should be solved by matching the described behavior to the Cisco feature that actually performs it. Cisco CCNA 200-301 v1.1 includes this topic under Network Access, so the answer must be validated against normal Cisco device behavior and the operational wording of the scenario. The key is not simply recognizing a familiar acronym; it is identifying what the feature does, where it is configured, and what result it produces. The other options are real networking terms or plausible phrases, but they operate at a different layer, solve a different problem, or do not create the outcome described. In a real network, selecting the wrong option would either leave the feature nonfunctional, create a forwarding or security gap, or send troubleshooting in the wrong direction. The selected answer is the only one that matches the stated requirement and the way Cisco switching, routing, services, security, wireless, or automation functions are expected to operate. This is why the verified answer remains the best technical choice for the question.

LACP. Switching features such as trunks and EtherChannels are controlled by negotiation mode, encapsulation, VLAN membership, and whether the selected protocol is Cisco proprietary or standards based. Cisco CCNA 200-301 v1.1 includes this topic under Network Access, so the answer must be validated against normal Cisco device behavior and the operational wording of the scenario. The key is not simply recognizing a familiar acronym; it is identifying what the feature does, where it is configured, and what result it produces. The incorrect options either disable negotiation, select the wrong negotiation protocol, or configure a mode that cannot form the requested link under the stated conditions. In a real network, selecting the wrong option would either leave the feature nonfunctional, create a forwarding or security gap, or send troubleshooting in the wrong direction. The selected answer is the only one that matches the stated requirement and the way Cisco switching, routing, services, security, wireless, or automation functions are expected to operate. This is why the verified answer remains the best technical choice for the question.

Answer A,E is correct: A. configure the helto and dead timers to match on both sides; E. configure both interfaces with the same area ID. OSPF decisions depend on router IDs, area membership, matching timers, network type, interface state, and cost calculation rather than arbitrary route preference. Cisco CCNA 200-301 v1.1 includes this topic under IP Connectivity, so the answer must be validated against normal Cisco device behavior and the operational wording of the scenario. The key is not simply recognizing a familiar acronym; it is identifying what the feature does, where it is configured, and what result it produces. Distractors that mention process IDs, unrelated metrics, or the wrong interface parameter do not satisfy OSPF neighbor or route-selection requirements. In a real network, selecting the wrong option would either leave the feature nonfunctional, create a forwarding or security gap, or send troubleshooting in the wrong direction. The selected answer is the only one that matches the stated requirement and the way Cisco switching, routing, services, security, wireless, or automation functions are expected to operate. This is why the verified answer remains the best technical choice for the question.

802.1x. The scenario should be solved by matching the described behavior to the Cisco feature that actually performs it. Cisco CCNA 200-301 v1.1 includes this topic under Security Fundamentals, so the answer must be validated against normal Cisco device behavior and the operational wording of the scenario. The key is not simply recognizing a familiar acronym; it is identifying what the feature does, where it is configured, and what result it produces. The other options are real networking terms or plausible phrases, but they operate at a different layer, solve a different problem, or do not create the outcome described. In a real network, selecting the wrong option would either leave the feature nonfunctional, create a forwarding or security gap, or send troubleshooting in the wrong direction. The selected answer is the only one that matches the stated requirement and the way Cisco switching, routing, services, security, wireless, or automation functions are expected to operate. This is why the verified answer remains the best technical choice for the question.

management. The scenario should be solved by matching the described behavior to the Cisco feature that actually performs it. Cisco CCNA 200-301 v1.1 includes this topic under Network Fundamentals, so the answer must be validated against normal Cisco device behavior and the operational wording of the scenario. The key is not simply recognizing a familiar acronym; it is identifying what the feature does, where it is configured, and what result it produces. The other options are real networking terms or plausible phrases, but they operate at a different layer, solve a different problem, or do not create the outcome described. In a real network, selecting the wrong option would either leave the feature nonfunctional, create a forwarding or security gap, or send troubleshooting in the wrong direction. The selected answer is the only one that matches the stated requirement and the way Cisco switching, routing, services, security, wireless, or automation functions are expected to operate. This is why the verified answer remains the best technical choice for the question.

The verified answer is the displayed drag-and-drop mapping. IPv6 address types are identified by prefix and scope. Global unicast is Internet-routable, unique local is private-like, link-local stays on the local link, and multicast reaches a group. Cisco CCNA 200-301 v1.1 places this skill in Network Fundamentals, where the exam expects a working understanding of how the feature behaves on real Cisco networks, not just a memorized command. Correct mapping depends on recognizing prefix ranges such as 2000::/3, FC00::/7, FE80::/10, and FF00::/8. In production, this distinction matters because a misapplied command or design choice usually creates an outage, a security gap, or unnecessary troubleshooting noise. The correct choice matches the control-plane, data-plane, wireless, security, or services behaviour described in the scenario and should be preferred over options that merely sound related.

Answer B,E is correct: B. implement port-based authentication; E. shut down unused ports. The scenario should be solved by matching the described behavior to the Cisco feature that actually performs it. Cisco CCNA 200-301 v1.1 includes this topic under Network Fundamentals, so the answer must be validated against normal Cisco device behavior and the operational wording of the scenario. The key is not simply recognizing a familiar acronym; it is identifying what the feature does, where it is configured, and what result it produces. The other options are real networking terms or plausible phrases, but they operate at a different layer, solve a different problem, or do not create the outcome described. In a real network, selecting the wrong option would either leave the feature nonfunctional, create a forwarding or security gap, or send troubleshooting in the wrong direction. The selected answer is the only one that matches the stated requirement and the way Cisco switching, routing, services, security, wireless, or automation functions are expected to operate. This is why the verified answer remains the best technical choice for the question.

The correct response is D. Band Select encourages capable clients to use 5 GHz instead of congested 2.4 GHz. This can improve voice quality when the 5-GHz band has more available capacity and less interference. For Cisco CCNA 200-301 v1.1, the important point is the mechanism, not a generic description of the technology. AAA Override affects authorization attributes, RX-SOP changes receive sensitivity behaviour, and DTIM relates to power-save delivery timing. When this appears in a network, the symptom normally confirms the answer: the route installed, the state selected, the packet forwarded, the wireless client behaviour, or the management workflow will follow this rule. That is why this answer is the best fit for the scenario and not just a plausible networking term.

Answer C is the technically correct selection. AES is the strongest cipher listed for WPA2-PSK. WPA2 uses CCMP based on AES for strong confidentiality and integrity compared with legacy TKIP, RC4, and WEP approaches. This aligns with Cisco CCNA 200-301 v1.1 because the exam blueprint requires engineers to recognize operational behaviour from configuration symptoms and topology requirements. WEP and TKIP are obsolete, and RC4 is associated with older insecure wireless encryption. Treat the distractors carefully: most are real Cisco terms, but they solve a different problem or operate at a different layer. The selected answer is the one that would be used by an engineer on the device or in the design to produce the outcome stated in the question.

The verified answer is A. DHCP can provide the default gateway to Windows workstations as part of the leased IP configuration. The router option tells the client which gateway to use for off-subnet destinations. Cisco CCNA 200-301 v1.1 places this skill in IP Services, where the exam expects a working understanding of how the feature behaves on real Cisco networks, not just a memorized command. STP prevents switching loops, SNMP monitors devices, and DNS resolves names; none of those supplies the default gateway address to the host. In production, this distinction matters because a misapplied command or design choice usually creates an outage, a security gap, or unnecessary troubleshooting noise. The correct choice matches the control-plane, data-plane, wireless, security, or services behaviour described in the scenario and should be preferred over options that merely sound related.

broadcast. OSPF decisions depend on router IDs, area membership, matching timers, network type, interface state, and cost calculation rather than arbitrary route preference. Cisco CCNA 200-301 v1.1 includes this topic under IP Connectivity, so the answer must be validated against normal Cisco device behavior and the operational wording of the scenario. The key is not simply recognizing a familiar acronym; it is identifying what the feature does, where it is configured, and what result it produces. Distractors that mention process IDs, unrelated metrics, or the wrong interface parameter do not satisfy OSPF neighbor or route-selection requirements. In a real network, selecting the wrong option would either leave the feature nonfunctional, create a forwarding or security gap, or send troubleshooting in the wrong direction. The selected answer is the only one that matches the stated requirement and the way Cisco switching, routing, services, security, wireless, or automation functions are expected to operate. This is why the verified answer remains the best technical choice for the question.

ip route 209.165.200.224 255.255.255.224 209.165.202.129 254. Cisco routers forward by longest prefix match first, then use administrative distance and metric when competing routes describe the same destination prefix. Cisco CCNA 200-301 v1.1 includes this topic under IP Connectivity, so the answer must be validated against normal Cisco device behavior and the operational wording of the scenario. The key is not simply recognizing a familiar acronym; it is identifying what the feature does, where it is configured, and what result it produces. Choices with the wrong prefix, mask, next hop, or administrative distance would either not match the traffic or would not behave as the intended backup path. In a real network, selecting the wrong option would either leave the feature nonfunctional, create a forwarding or security gap, or send troubleshooting in the wrong direction. The selected answer is the only one that matches the stated requirement and the way Cisco switching, routing, services, security, wireless, or automation functions are expected to operate. This is why the verified answer remains the best technical choice for the question.

It uses a route that is similar to the destination address. The scenario should be solved by matching the described behavior to the Cisco feature that actually performs it. Cisco CCNA 200-301 v1.1 includes this topic under IP Connectivity, so the answer must be validated against normal Cisco device behavior and the operational wording of the scenario. The key is not simply recognizing a familiar acronym; it is identifying what the feature does, where it is configured, and what result it produces. The other options are real networking terms or plausible phrases, but they operate at a different layer, solve a different problem, or do not create the outcome described. In a real network, selecting the wrong option would either leave the feature nonfunctional, create a forwarding or security gap, or send troubleshooting in the wrong direction. The selected answer is the only one that matches the stated requirement and the way Cisco switching, routing, services, security, wireless, or automation functions are expected to operate. This is why the verified answer remains the best technical choice for the question.

It provides shared applications to end users.. The scenario should be solved by matching the described behavior to the Cisco feature that actually performs it. Cisco CCNA 200-301 v1.1 includes this topic under Network Fundamentals, so the answer must be validated against normal Cisco device behavior and the operational wording of the scenario. The key is not simply recognizing a familiar acronym; it is identifying what the feature does, where it is configured, and what result it produces. The other options are real networking terms or plausible phrases, but they operate at a different layer, solve a different problem, or do not create the outcome described. In a real network, selecting the wrong option would either leave the feature nonfunctional, create a forwarding or security gap, or send troubleshooting in the wrong direction. The selected answer is the only one that matches the stated requirement and the way Cisco switching, routing, services, security, wireless, or automation functions are expected to operate. This is why the verified answer remains the best technical choice for the question.

Answer D and E is the technically correct selection. When creating a WLAN on a Cisco WLC, the required identity fields include the profile name and SSID. The profile name identifies the WLAN object in the controller, and the SSID is the network name advertised or used by clients. This aligns with Cisco CCNA 200-301 v1.1 because the exam blueprint requires engineers to recognize operational behaviour from configuration symptoms and topology requirements. AP IP addresses and QoS settings can be adjusted elsewhere, but they are not the two required values in this creation step. Treat the distractors carefully: most are real Cisco terms, but they solve a different problem or operate at a different layer. The selected answer is the one that would be used by an engineer on the device or in the design to produce the outcome stated in the question.

default route. Cisco routers forward by longest prefix match first, then use administrative distance and metric when competing routes describe the same destination prefix. Cisco CCNA 200-301 v1.1 includes this topic under IP Connectivity, so the answer must be validated against normal Cisco device behavior and the operational wording of the scenario. The key is not simply recognizing a familiar acronym; it is identifying what the feature does, where it is configured, and what result it produces. Choices with the wrong prefix, mask, next hop, or administrative distance would either not match the traffic or would not behave as the intended backup path. In a real network, selecting the wrong option would either leave the feature nonfunctional, create a forwarding or security gap, or send troubleshooting in the wrong direction. The selected answer is the only one that matches the stated requirement and the way Cisco switching, routing, services, security, wireless, or automation functions are expected to operate. This is why the verified answer remains the best technical choice for the question.